I´am a big fan of proxmox! I use the qemu-nbd tool to mount the qow2 file (read-only) constant.
But it not running cleanly since the last update.
i can cleanly do:
qemu-nbd -r --connect=/dev/nbd0 /mnt/pve/123-vms/images/190/vm-190-disk-2.qcow2
But i can not see the device in /proc/partions or in /dev/.
mount /dev/nbd0p5 /tmp/test/
mount: special device /dev/nbd0p5 does not exist
When i check the partition with "cfdisk", i can see the nbd0p5 partition!
What can i do to fix it?
qemu-nbd -V
qemu-nbd version 0.0.1
pveversion -v
pve-manager: 2.1-1 (pve-manager/2.1/f9b0f63a)
running kernel: 2.6.32-11-pve
proxmox-ve-2.6.32: 2.0-66
pve-kernel-2.6.32-6-pve: 2.6.32-55
pve-kernel-2.6.32-11-pve: 2.6.32-66
pve-kernel-2.6.32-7-pve: 2.6.32-60
lvm2: 2.02.95-1pve2
clvm: 2.02.95-1pve2
corosync-pve: 1.4.3-1
openais-pve: 1.1.4-2
libqb: 0.10.1-2
redhat-cluster-pve: 3.1.8-3
resource-agents-pve: 3.9.2-3
fence-agents-pve: 3.1.7-2
pve-cluster: 1.0-26
qemu-server: 2.0-39
pve-firmware: 1.0-15
libpve-common-perl: 1.0-27
libpve-access-control: 1.0-21
libpve-storage-perl: 2.0-18
vncterm: 1.0-2
vzctl: 3.0.30-2pve5
vzprocps: 2.0.11-2
vzquota: 3.0.12-3
pve-qemu-kvm: 1.0-9
ksm-control-daemon: 1.1-1
But it not running cleanly since the last update.
i can cleanly do:
qemu-nbd -r --connect=/dev/nbd0 /mnt/pve/123-vms/images/190/vm-190-disk-2.qcow2
But i can not see the device in /proc/partions or in /dev/.
mount /dev/nbd0p5 /tmp/test/
mount: special device /dev/nbd0p5 does not exist
When i check the partition with "cfdisk", i can see the nbd0p5 partition!
What can i do to fix it?
qemu-nbd -V
qemu-nbd version 0.0.1
pveversion -v
pve-manager: 2.1-1 (pve-manager/2.1/f9b0f63a)
running kernel: 2.6.32-11-pve
proxmox-ve-2.6.32: 2.0-66
pve-kernel-2.6.32-6-pve: 2.6.32-55
pve-kernel-2.6.32-11-pve: 2.6.32-66
pve-kernel-2.6.32-7-pve: 2.6.32-60
lvm2: 2.02.95-1pve2
clvm: 2.02.95-1pve2
corosync-pve: 1.4.3-1
openais-pve: 1.1.4-2
libqb: 0.10.1-2
redhat-cluster-pve: 3.1.8-3
resource-agents-pve: 3.9.2-3
fence-agents-pve: 3.1.7-2
pve-cluster: 1.0-26
qemu-server: 2.0-39
pve-firmware: 1.0-15
libpve-common-perl: 1.0-27
libpve-access-control: 1.0-21
libpve-storage-perl: 2.0-18
vncterm: 1.0-2
vzctl: 3.0.30-2pve5
vzprocps: 2.0.11-2
vzquota: 3.0.12-3
pve-qemu-kvm: 1.0-9
ksm-control-daemon: 1.1-1