Using Proxmox PVE 8.1.4, If I use the OVMF (UEFI) BIOS and let it try to either PXE or iPXE boot, the DHCP request goes off to the DHCP server and a reply gets sent back, after which the BIOS ARPs for the default gateway, to which it gets an answer ... and then continues to ARP for the default gateway until it decides to give up.
The VM is attached to a bridge that's on top of a bonding (bond0) interface that's using "balance-rr".
When both ports are plugged into the switch (Cisco SG series), PXE will fail. Unplug one port and PXE boots.
Thoughts about what the root cause could be?
The VM is attached to a bridge that's on top of a bonding (bond0) interface that's using "balance-rr".
When both ports are plugged into the switch (Cisco SG series), PXE will fail. Unplug one port and PXE boots.
Thoughts about what the root cause could be?