[SOLVED] PVE Webinterface no listen on IPV6 if an static address is set

[fireon]

Hello,

strange behavior. PVE Webinterface does not listen on Port 8006 if an static IPV6 address is set on the host. SSH and other things works normal over ipv6, only pve webinterface is not available. I've done an nmapscan and it says "filtered".

But if a delete the static address and let radvd do his job, then it is working fine. And yes the static address and route es same like from radvd.

Any suggestions? pve-manager/5.1-46/ae8241d4 (running kernel: 4.13.13-6-pve)

 

[dietmar]

Local hostname resolves to an IPv6 address (/etc/hosts)?

 

[fireon]

Local hostname resolves to an IPv6 address (/etc/hosts)?

That was the problem, thanks!

Is it planed to set ipv6-adresses also in the installer? So that you are not running in this issue.

 

[dietmar]

Is it planed to set ipv6-adresses also in the installer? So that you are not running in this issue.

That should work already.

 

[fireon]

That should work already.

I've looked at the newest ISO. No input screen for IPV6 addresses.

 

[dietmar]

I've looked at the newest ISO. No input screen for IPV6 addresses.

There is an input for the IP address, which can b e either IPv4 or IPv6 ...

 

[fireon]

There is an input for the IP address, which can b e either IPv4 or IPv6 ...

Ah ok... so but not dualstack, right?

 

[dietmar]

Ah ok... so but not dualstack, right?

right - it easy to configure that afterwards.

 

[fireon]

Ok