PVE no SMART status of PCIe SSD in GUI

[Oggy512]

Hi folks,
I'm running a PVE node, v6.2-15 on a Supermicro X11SCH-LN4F board with a Samsung PM1725b PCIe SSD.
In the GUI there is no SMART status of that SSD shown:


If I ssh into the host and run smartctl command, I get the SMART details:




Any ideas, why the status is not shown in the GUI and how to fix that?

thx!

Cheers!

 

[bobmc]

I would imagine you're using the NVME drive on a PCIe card? If so, it's probably a limitation of the card and the system bios

 

[Stark-Johan]

Did you ever find any solution or explanation to this issue?

I have the same drive with the same issue. The smart data seems fine on the cli. I also have other similar Samsung nvme drives which show up just fine even if the smart data of these drives are very similar.

Error getting S.M.A.R.T. data: Exit code: 2 (500)

Spoiler: smartctl output

smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.4.140-1-pve] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Number:                       SAMSUNG MZPLL1T6HAJQ-00005
Serial Number:                      S4CBNAXXXXXXX
Firmware Version:                   GPJA2B3Q
PCI Vendor/Subsystem ID:            0x144d
IEEE OUI Identifier:                0x002538
Total NVM Capacity:                 1,600,321,314,816 [1.60 TB]
Unallocated NVM Capacity:           0
Controller ID:                      33
NVMe Version:                       1.2.1
Number of Namespaces:               32
Namespace 1 Size/Capacity:          1,600,321,314,816 [1.60 TB]
Namespace 1 Formatted LBA Size:     512
Local Time is:                      Wed Oct  6 19:36:52 2021 CEST
Firmware Updates (0x17):            3 Slots, Slot 1 R/O, no Reset required
Optional Admin Commands (0x000e):   Format Frmw_DL NS_Mngmt
Optional NVM Commands (0x003e):     Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Resv
Log Page Attributes (0x02):         Cmd_Eff_Lg
Maximum Data Transfer Size:         32 Pages
Warning  Comp. Temp. Threshold:     79 Celsius
Critical Comp. Temp. Threshold:     86 Celsius

Supported Power States
St Op     Max   Active     Idle   RL RT WL WT  Ent_Lat  Ex_Lat
 0 +    25.00W       -        -    0  0  0  0      100     100

Supported LBA Sizes (NSID 0x1)
Id Fmt  Data  Metadt  Rel_Perf
 0 -     512       0         1
 1 -     512       8         3
 2 -    4096       0         0
 3 -    4096       8         2

=== START OF SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

SMART/Health Information (NVMe Log 0x02)
Critical Warning:                   0x00
Temperature:                        38 Celsius
Available Spare:                    100%
Available Spare Threshold:          10%
Percentage Used:                    0%
Data Units Read:                    46,809,140 [23.9 TB]
Data Units Written:                 77,604,305 [39.7 TB]
Host Read Commands:                 1,332,432,638
Host Write Commands:                2,155,587,682
Controller Busy Time:               1,534
Power Cycles:                       47
Power On Hours:                     15,697
Unsafe Shutdowns:                   17
Media and Data Integrity Errors:    0
Error Information Log Entries:      0
Warning  Comp. Temperature Time:    0
Critical Comp. Temperature Time:    0
Temperature Sensor 1:               38 Celsius
Temperature Sensor 2:               36 Celsius
Temperature Sensor 3:               36 Celsius

Error Information (NVMe Log 0x01, 16 of 256 entries)
No Errors Logged