Prxmox v7: iscsi + multipath error

[vnngoanhtuan]

Hi,

I follow the guideline at:
- https://pve.proxmox.com/wiki/Proxmox_ISCSI_installation
- https://pve.proxmox.com/wiki/ISCSI_Multipath

The status installation is ok but I do not see iSCSI target into /dev/sdX after the status login is ok and no issue.
- lsscsi no iscsi target

root@proxmox02:~# iscsiadm -m session -P 1
Target: iqn.2016-02.local.virtual:virtual.vg1 (non-flash)
Current Portal: 10.20.1.180:3260,1
Persistent Portal: 10.20.1.180:3260,1
**********
Interface:
**********
Iface Name: default
Iface Transport: tcp
Iface Initiatorname: iqn.1993-08.org.debian:01:674b46a9745
Iface IPaddress: 10.20.1.186
Iface HWaddress: default
Iface Netdev: default
SID: 1
iSCSI Connection State: LOGGED IN
iSCSI Session State: LOGGED_IN
Internal iscsid Session State: NO CHANGE

Can you help me on this issue?

Thanks,
Tuan Ngo

 

[mira]

Please provide your storage config (/etc/pve/storage.cfg), your multipath config (everything in /etc/multipath/ and the config itself /etc/multipath.conf) and the output of ls -l /dev/disk/by-id/.