Proxmox Virtual Environment now available for 64-bit ARM (arm64)!

This may be useful information for some:
bbgeek17

[TUTORIAL] Thread 'PVE 9.2 arm64 on ASUS GX10 (GB10): black screen after initrd, fix is console=tty0'

If you install Proxmox VE 9.2 arm64 on an ASUS GX10 or a DGX Spark, the first boot will show a black screen, and you will think it hung. It did not. Here is why, and the fix.

For context, we bought some GX10 systems (NVIDIA GB10, same board as the DGX Spark) for PVE arm64 qualification of our storage driver. Sure, these aren’t on the “official support” list, but it costs a lot less than a Grace Hopper node and consumes less power ;)

Hardware​

  • ASUS Ascent GX10
  • NVIDIA GB10, 20 cores, 3.9 GHz
  • 128 GB LPDDR5 8533
  • UEFI GX10DGX.0105.2026.0505.1153 (AMI, 2026-05-05), EC...
  • Like

Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox
 
  • Like
Reactions: Johannes S and Stoiko Ivanov
Additional tech-note for ARM platform:
bbgeek17

[TUTORIAL] Thread 'PVE arm64 on ASUS GX10 (GB10): hard reset every ~20 minutes, fix is loading sbsa_gwdt'

Here’s another problem we hit bringing PVE arm64 up on the GX10. The first was the black screen after initrd (thread here). Posting this one since the symptom is a show stopper.

Hardware​

  • ASUS Ascent GX10
  • NVIDIA GB10, 20 cores, 3.9 GHz
  • 128 GB LPDDR5 8533
  • UEFI GX10DGX.0105.2026.0505.1153 (AMI, 2026-05-05), EC 3.3.2
  • pve-manager 9.2.9, kernel 7.0.14-6-pve
  • ext4/LVM root, GRUB

Issue​

The host hard-resets every 20 minutes 40 seconds after power-on, even when idle with no guests running. Nothing in the logs. The journal just stops mid-stream, and last...
  • Like


Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox
 
  • Like
Reactions: Johannes S
You must log in or register to reply here.
Top Bottom
Back