I've encountered a problem. I used Rufus to burn the latest proxmox-ve_8.3-1.iso onto a USB drive and attempted to install it on an HP ProLiant DL380 G7 server. Each time, I can successfully reach the Proxmox VE menu interface, but when I select any option to boot up, the screen goes black and displays a message indicating that the current resolution is too high. How can this issue be resolved?
Proxmox VE install help
- Thread starter huangkz
- Start date
Hi,
sound a bit like https://bugzilla.proxmox.com/show_bug.cgi?id=4794.
Can you try setting the nomodeset kernel parameter before boot in the GRUB menu, to see if that fixes it.
sound a bit like https://bugzilla.proxmox.com/show_bug.cgi?id=4794.
Can you try setting the nomodeset kernel parameter before boot in the GRUB menu, to see if that fixes it.
These systems are very old, so it's very much possible that e.g. the graphics driver is simply not tested anymore (and thus problems like these are not seen) for such old hardware.
Weird part is two drive letters are displayed for the USB drive after the process is completed. Both are inaccessible. The same symptoms using either Rufus or Etcher. When trying to boot off the USB stick on a SuperMicro server, the process hangs at detecting USB drive, then skips it. I tried creating this USB boot stick on two different USB sticks. One using Rufus, the other Etcher. Identical results on each. The only way to make the USB sticks usable again is to burn a different ISO like Debian.