Hello,
i already saw some posts here regarding the NIC card and "ethtool -K eno1 tso off gso off "
Unfortunately i have another error regarding CPU:
Maybe related to the NIC error. Maybe another bug.
The CPU usage is about 2-4% for 8 cpu's. over the last day.
i already saw some posts here regarding the NIC card and "ethtool -K eno1 tso off gso off "
Unfortunately i have another error regarding CPU:
Code:
[Mon Feb 3 00:59:05 2020] e1000e 0000:00:1f.6 eno1: Detected Hardware Unit Hang:
TDH <18>
TDT <53>
next_to_use <53>
next_to_clean <17>
buffer_info[next_to_clean]:
time_stamp <10074c090>
next_to_watch <18>
jiffies <10074c750>
next_to_watch.status <0>
MAC Status <40080083>
PHY Status <796d>
PHY 1000BASE-T Status <3800>
PHY Extended Status <3000>
PCI Status <10>
[Mon Feb 3 00:59:06 2020] ------------[ cut here ]------------
[Mon Feb 3 00:59:06 2020] NETDEV WATCHDOG: eno1 (e1000e): transmit queue 0 timed out
[Mon Feb 3 00:59:06 2020] WARNING: CPU: 4 PID: 0 at net/sched/sch_generic.c:448 dev_watchdog+0x264/0x270
[Mon Feb 3 00:59:06 2020] Modules linked in: veth ebtable_filter ebtables ip_set ip6table_raw iptable_raw ip6table_filter ip6_tables iptable_filter bpfilter softdog nfnetlink_log nfnetlink intel_rapl_msr intel_rapl_common x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel zfs(PO) aesni_intel zunicode(PO) aes_x86_64 zlua(PO) crypto_simd zavl(PO) cryptd glue_helper icp(PO) intel_cstate mei_hdcp i915 drm_kms_helper intel_rapl_perf drm rtsx_pci_ms mei_me i2c_algo_bit fb_sys_fops memstick syscopyarea sysfillrect sysimgblt wmi_bmof mei pcspkr intel_wmi_thunderbolt intel_pch_thermal mac_hid acpi_pad acpi_tad zcommon(PO) znvpair(PO) spl(O) vhost_net vhost tap ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi sunrpc ip_tables x_tables autofs4 btrfs xor zstd_compress raid6_pq dm_thin_pool dm_persistent_data dm_bio_prison dm_bufio libcrc32c rtsx_pci_sdmmc e1000e i2c_i801 ahci rtsx_pci libahci wmi
[Mon Feb 3 00:59:06 2020] pinctrl_cannonlake video pinctrl_intel
[Mon Feb 3 00:59:06 2020] CPU: 4 PID: 0 Comm: swapper/4 Tainted: P O 5.3.13-1-pve #1
[Mon Feb 3 00:59:06 2020] Hardware name: Intel(R) Client Systems NUC8i5BEH/NUC8BEB, BIOS BECFL357.86A.0073.2019.0618.1409 06/18/2019
[Mon Feb 3 00:59:06 2020] RIP: 0010:dev_watchdog+0x264/0x270
[Mon Feb 3 00:59:06 2020] Code: 48 85 c0 75 e6 eb a0 4c 89 ef c6 05 f2 6f ea 00 01 e8 10 ed fa ff 89 d9 4c 89 ee 48 c7 c7 88 cc 61 a9 48 89 c2 e8 0d 3a 73 ff <0f> 0b eb 82 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 41
[Mon Feb 3 00:59:06 2020] RSP: 0018:ffff9d63001e4e58 EFLAGS: 00010282
[Mon Feb 3 00:59:06 2020] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000006
[Mon Feb 3 00:59:06 2020] RDX: 0000000000000007 RSI: 0000000000000082 RDI: ffff8f1c6eb17440
[Mon Feb 3 00:59:06 2020] RBP: ffff9d63001e4e88 R08: 0000000000000368 R09: 0000000000000004
[Mon Feb 3 00:59:06 2020] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000001
[Mon Feb 3 00:59:06 2020] R13: ffff8f1c61e04000 R14: ffff8f1c61e04480 R15: ffff8f1c6bc9f480
[Mon Feb 3 00:59:06 2020] FS: 0000000000000000(0000) GS:ffff8f1c6eb00000(0000) knlGS:0000000000000000
[Mon Feb 3 00:59:06 2020] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[Mon Feb 3 00:59:06 2020] CR2: 0000122a17cb4000 CR3: 0000000463b04001 CR4: 00000000003626e0
[Mon Feb 3 00:59:06 2020] Call Trace:
[Mon Feb 3 00:59:06 2020] <IRQ>
[Mon Feb 3 00:59:06 2020] ? pfifo_fast_enqueue+0x160/0x160
[Mon Feb 3 00:59:06 2020] call_timer_fn+0x32/0x130
[Mon Feb 3 00:59:06 2020] run_timer_softirq+0x19d/0x420
[Mon Feb 3 00:59:06 2020] ? enqueue_hrtimer+0x3c/0x90
[Mon Feb 3 00:59:06 2020] ? ktime_get+0x40/0xa0
[Mon Feb 3 00:59:06 2020] ? lapic_next_deadline+0x26/0x30
[Mon Feb 3 00:59:06 2020] ? clockevents_program_event+0x93/0xf0
[Mon Feb 3 00:59:06 2020] __do_softirq+0xdc/0x2d4
[Mon Feb 3 00:59:06 2020] irq_exit+0xa9/0xb0
[Mon Feb 3 00:59:06 2020] smp_apic_timer_interrupt+0x79/0x130
[Mon Feb 3 00:59:06 2020] apic_timer_interrupt+0xf/0x20
[Mon Feb 3 00:59:06 2020] </IRQ>
[Mon Feb 3 00:59:06 2020] RIP: 0010:cpuidle_enter_state+0xbd/0x450
[Mon Feb 3 00:59:06 2020] Code: ff e8 87 ea 82 ff 80 7d c7 00 74 17 9c 58 0f 1f 44 00 00 f6 c4 02 0f 85 63 03 00 00 31 ff e8 6a 51 89 ff fb 66 0f 1f 44 00 00 <45> 85 ed 0f 89 cf 01 00 00 41 c7 44 24 10 00 00 00 00 48 83 c4 18
[Mon Feb 3 00:59:06 2020] RSP: 0018:ffff9d63000f7e48 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
[Mon Feb 3 00:59:06 2020] RAX: ffff8f1c6eb2a740 RBX: ffffffffa9958900 RCX: 000000000000001f
[Mon Feb 3 00:59:06 2020] RDX: 00001c1d954ff265 RSI: 00000000378e3a78 RDI: 0000000000000000
[Mon Feb 3 00:59:06 2020] RBP: ffff9d63000f7e88 R08: 0000000000000002 R09: 0000000000029fc0
[Mon Feb 3 00:59:06 2020] R10: 000040cf19103c98 R11: ffff8f1c6eb294c4 R12: ffff8f1c6eb35500
[Mon Feb 3 00:59:06 2020] R13: 0000000000000001 R14: ffffffffa9958978 R15: ffffffffa9958960
[Mon Feb 3 00:59:06 2020] ? cpuidle_enter_state+0x99/0x450
[Mon Feb 3 00:59:06 2020] cpuidle_enter+0x2e/0x40
[Mon Feb 3 00:59:06 2020] call_cpuidle+0x23/0x40
[Mon Feb 3 00:59:06 2020] do_idle+0x22c/0x270
[Mon Feb 3 00:59:06 2020] cpu_startup_entry+0x1d/0x20
[Mon Feb 3 00:59:06 2020] start_secondary+0x167/0x1c0
[Mon Feb 3 00:59:06 2020] secondary_startup_64+0xa4/0xb0
[Mon Feb 3 00:59:06 2020] ---[ end trace b04ccbce9f9e1380 ]---
[Mon Feb 3 00:59:06 2020] e1000e 0000:00:1f.6 eno1: Reset adapter unexpectedly
[Mon Feb 3 00:59:06 2020] vmbr0: port 1(eno1) entered disabled state
[Mon Feb 3 00:59:13 2020] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[Mon Feb 3 00:59:13 2020] vmbr0: port 1(eno1) entered blocking state
[Mon Feb 3 00:59:13 2020] vmbr0: port 1(eno1) entered forwarding state
[Mon Feb 3 03:45:53 2020] perf: interrupt took too long (4958 > 4956), lowering kernel.perf_event_max_sample_rate to 40250Maybe related to the NIC error. Maybe another bug.
The CPU usage is about 2-4% for 8 cpu's. over the last day.
