ProxMox Network Setup Problem

[Dizalica]

Hi,
after initial ProxMox instalation, the default network setup does not work.
Please, is there anybody to help me? Here is my /etc/network/interfaces file and screenshots of proxmox installation:

# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
iface enp1s0f0 inet manual
auto vmbr0
iface vmbr0 inet static
address 195.154.82.196
netmask 255.255.255.0
gateway 195.154.82.1
bridge_ports enp1s0f0
bridge_stp off
bridge_fd 0


The IP failover is 212.83.181.157

 

[Richard]

Hi,
after initial ProxMox instalation, the default network setup does not work.
Please, is there anybody to help me? Here is my /etc/network/interfaces file and screenshots of proxmox installation:

# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
iface enp1s0f0 inet manual
auto vmbr0
iface vmbr0 inet static
address 195.154.82.196
netmask 255.255.255.0
gateway 195.154.82.1
bridge_ports enp1s0f0
bridge_stp off
bridge_fd 0


The IP failover is 212.83.181.157

What in particular does not work? Not at all? Connection from Host/Container to Internet/Host/Container?


Are you sure that the containers MAC address is accepted by the provider's router/switch?