proxmox failing to connect to samba share with error NT_STATUS_LOGON_FAILURE (500)

F

fdavidg

New Member
Jul 11, 2024
9
0
1
Coeur d'Alene, Idaho, USA
Hello,

I am running Proxmox version 8.3.3 at this time. Starting this past Monday I can no longer connect to my NAS via a Samba share thru my TrueNAS server. I can connect to this share from a Windows 10 machine with no problem. I am at a total loss on how to solve this problem. I have a cluster running pve and pve2 that has been running flawlessly since before September 2024. Now all of a sudden I have totally lost the ability to run my VMs.
i dont recall doing any updates before having the problem.How can I check the last kenel update date and time? Im running proxmox VE 8.3.3 and if any logs are required ill try to respond asap.
I have noticed in the DataCenter Summary that pve is reporting a server address of 10.12.34.31 rather than 192.168.1.250 I think it should be.
I have seen mention of reverting the kernel by Kingneutron in May 2024: "Try booting back to a previous kernel version, 6.8 kernel is apparently a clusterb0mb for lots of ppl", but I have no idea if this applies or even how to proceed to do so.
I would appreciate any and help to resolve this issue!
Thank you in advance.

Frank D Gunseor
 
Hello fdavidg!

fdavidg said:
i dont recall doing any updates before having the problem.How can I check the last kenel update date and time?
Click to expand...
You can check the contents of /var/log/apt/history.log.

fdavidg said:
I have seen mention of reverting the kernel by Kingneutron in May 2024: "Try booting back to a previous kernel version, 6.8 kernel is apparently a clusterb0mb for lots of ppl", but I have no idea if this applies or even how to proceed to do so.
Click to expand...
When doing a major kernel update (e.g. 6.8 to 6.11), it is possible for the network interface to get renamed. Or otherwise it can also happen that a network card is no longer detected (e.g. due to incompatible drivers).

Some thoughts:
  1. What is the output of ip a?
  2. What is the output of lspci?
  3. Do you see any error messages related to the network card or drivers in dmesg?

fdavidg said:
I have noticed in the DataCenter Summary that pve is reporting a server address of 10.12.34.31 rather than 192.168.1.250 I think it should be.
Click to expand...
Please check and (if necessary) adapt, the network configuration, either under Datacenter -> NODE_NAME -> Network, or by editing /etc/network/interfaces (see Apply Network Changes).
 
Hello,

Thanks to everyone who had suggestions.

I do not understand what is going on here (FROM DMESG):

[ 17.548785] vmbr0: port 1(eno1) entered blocking state
[ 17.548790] vmbr0: port 1(eno1) entered disabled state
[ 17.548808] e1000e 0000:00:19.0 eno1: entered allmulticast mode
[ 17.817109] vmbr1: port 1(enp7s0) entered blocking state
[ 17.817115] vmbr1: port 1(enp7s0) entered disabled state
[ 17.817133] igb 0000:07:00.0 enp7s0: entered allmulticast mode
[ 19.682330] sctp: Hash tables configured (bind 4096/4096)
[ 20.691556] igb 0000:07:00.0 enp7s0: igb: enp7s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 20.801860] vmbr1: port 1(enp7s0) entered blocking state
[ 20.801860] vmbr1: port 1(enp7s0) entered blocking state
[ 20.801867] vmbr1: port 1(enp7s0) entered forwarding state
[ 20.944263] e1000e 0000:00:19.0 eno1: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 20.944313] vmbr0: port 1(eno1) entered blocking state
[ 20.944316] vmbr0: port 1(eno1) entered forwarding state

Here are the complete results:

1.) The contents of /var/log/apt/history.log was EMPTY.

2.) The results if ip a:root@pve:~# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host noprefixroute
valid_lft forever preferred_lft forever
2: ens6f0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 3c:a8:2a:5c:b7:74 brd ff:ff:ff:ff:ff:ff
altname enp3s0f0
3: ens6f1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 3c:a8:2a:5c:b7:75 brd ff:ff:ff:ff:ff:ff
altname enp3s0f1
4: eno1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master vmbr0 state UP group default qlen 1000
link/ether 40:b0:34:1e:c6:32 brd ff:ff:ff:ff:ff:ff
altname enp0s25
5: ens6f2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 3c:a8:2a:5c:b7:76 brd ff:ff:ff:ff:ff:ff
altname enp3s0f2
6: ens6f3: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 3c:a8:2a:5c:b7:77 brd ff:ff:ff:ff:ff:ff
altname enp3s0f3
7: enp7s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master vmbr1 state UP group default qlen 1000
link/ether 40:b0:34:1e:c6:33 brd ff:ff:ff:ff:ff:ff
8: vmbr0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/ether 40:b0:34:1e:c6:32 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.250/24 scope global vmbr0
valid_lft forever preferred_lft forever
inet6 fe80::42b0:34ff:fe1e:c632/64 scope link
valid_lft forever preferred_lft forever
9: vmbr1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/ether 40:b0:34:1e:c6:33 brd ff:ff:ff:ff:ff:ff
inet 135.134.148.131/24 scope global vmbr1
valid_lft forever preferred_lft forever
inet6 fe80::42b0:34ff:fe1e:c633/64 scope link
valid_lft forever preferred_lft forever
10: tap100i0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master fwbr100i0 state UNKNOWN group default qlen 1000
link/ether 8e:a2:4b:79:f3:c2 brd ff:ff:ff:ff:ff:ff
11: fwbr100i0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/ether f6:25:9d:1d:f1:79 brd ff:ff:ff:ff:ff:ff
12: fwpr100p0@fwln100i0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master vmbr0 state UP group default qlen 1000
link/ether 96:ca:aa:f7:00:3c brd ff:ff:ff:ff:ff:ff
13: fwln100i0@fwpr100p0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master fwbr100i0 state UP group default qlen 1000
link/ether f6:25:9d:1d:f1:79 brd ff:ff:ff:ff:ff:ff
root@pve:~#

3.) the results of lspci:
root@pve:~# lspci
00:00.0 Host bridge: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DMI2 (rev 01)
00:01.0 PCI bridge: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D PCI Express Root Port 1 (rev 01)
00:01.1 PCI bridge: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D PCI Express Root Port 1 (rev 01)
00:02.0 PCI bridge: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D PCI Express Root Port 2 (rev 01)
00:03.0 PCI bridge: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D PCI Express Root Port 3 (rev 01)
00:05.0 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Map/VTd_Misc/System Management (rev 01)
00:05.1 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D IIO Hot Plug (rev 01)
00:05.2 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D IIO RAS/Control Status/Global Errors (rev 01)
00:05.4 PIC: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D I/O APIC (rev 01)
00:11.0 Unassigned class [ff00]: Intel Corporation C610/X99 series chipset SPSR (rev 05)
00:11.4 RAID bus controller: Intel Corporation C610/X99 series chipset sSATA Controller [RAID mode] (rev 05)
00:14.0 USB controller: Intel Corporation C610/X99 series chipset USB xHCI Host Controller (rev 05)
00:16.0 Communication controller: Intel Corporation C610/X99 series chipset MEI Controller #1 (rev 05)
00:16.3 Serial controller: Intel Corporation C610/X99 series chipset KT Controller (rev 05)
00:19.0 Ethernet controller: Intel Corporation Ethernet Connection (2) I218-LM (rev 05)
00:1a.0 USB controller: Intel Corporation C610/X99 series chipset USB Enhanced Host Controller #2 (rev 05)
00:1b.0 Audio device: Intel Corporation C610/X99 series chipset HD Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation C610/X99 series chipset PCI Express Root Port #1 (rev d5)
00:1c.3 PCI bridge: Intel Corporation C610/X99 series chipset PCI Express Root Port #4 (rev d5)
00:1c.4 PCI bridge: Intel Corporation C610/X99 series chipset PCI Express Root Port #5 (rev d5)
00:1d.0 USB controller: Intel Corporation C610/X99 series chipset USB Enhanced Host Controller #1 (rev 05)
00:1f.0 ISA bridge: Intel Corporation C610/X99 series chipset LPC Controller (rev 05)
00:1f.2 RAID bus controller: Intel Corporation C600/X79 series chipset SATA RAID Controller (rev 05)
00:1f.3 SMBus: Intel Corporation C610/X99 series chipset SMBus Controller (rev 05)
01:00.0 Serial Attached SCSI controller: Broadcom / LSI SAS2308 PCI-Express Fusion-MPT SAS-2 (rev 05)
03:00.0 Ethernet controller: Intel Corporation I350 Gigabit Network Connection (rev 01)
03:00.1 Ethernet controller: Intel Corporation I350 Gigabit Network Connection (rev 01)
03:00.2 Ethernet controller: Intel Corporation I350 Gigabit Network Connection (rev 01)
03:00.3 Ethernet controller: Intel Corporation I350 Gigabit Network Connection (rev 01)
06:00.0 VGA compatible controller: NVIDIA Corporation GM204GL [Quadro M4000] (rev a1)
06:00.1 Audio device: NVIDIA Corporation GM204 High Definition Audio Controller (rev a1)
07:00.0 Ethernet controller: Intel Corporation I210 Gigabit Network Connection (rev 03)
7f:08.0 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D QPI Link 0 (rev 01)


4.) dmesg:
[ 0.000000] Linux version 6.8.12-7-pve (build@proxmox) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC PMX 6.8.>



[ 2.936209] hub 2-0:1.0: USB hub found
[ 2.936214] hub 2-0:1.0: 2 ports detected
[ 2.958990] igb 0000:03:00.0: added PHC on eth0
[ 2.959002] igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 2.959003] igb 0000:03:00.0: eth0: (PCIe:5.0Gb/s:Width x4) 3c:a8:2a:5c:b7:74
[ 2.959296] igb 0000:03:00.0: eth0: PBA No: H73100-000
[ 2.936077] usb usb2: Manufacturer: Linux 6.8.12-7-pve ehci_hcd
[ 2.936079] usb usb2: SerialNumber: 0000:00:1d.0
[ 2.936209] hub 2-0:1.0: USB hub found
[ 2.936214] hub 2-0:1.0: 2 ports detected
[ 2.958990] igb 0000:03:00.0: added PHC on eth0
[ 2.959002] igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 2.959003] igb 0000:03:00.0: eth0: (PCIe:5.0Gb/s:Width x4) 3c:a8:2a:5c:b7:74
[ 2.959296] igb 0000:03:00.0: eth0: PBA No: H73100-000
[ 2.959301] igb 0000:03:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
[ 2.986384] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[ 2.994778] mpt2sas_cm0: CurrentHostPageSize is 0: Setting default host page size to 4k
[ 2.994791] mpt2sas_cm0: MSI-X vectors supported: 16
[ 2.994794] no of cores: 56, max_msix_vectors: -1
[ 2.994798] mpt2sas_cm0: 0 16 16
[ 2.995344] mpt2sas_cm0: High IOPs queues : disabled
[ 2.995346] mpt2sas0-msix0: PCI-MSI-X enabled: IRQ 58
[
[ 2.995361] mpt2sas0-msix15: PCI-MSI-X enabled: IRQ 76
[ 2.995362] mpt2sas_cm0: iomem(0x00000000f3840000), mapped(0x000000007b1ef77a), size(65536)
[ 2.995365] mpt2sas_cm0: ioport(0x0000000000004000), size(256)
[ 3.017402] igb 0000:03:00.1: added PHC on eth1
[ 3.017414] igb 0000:03:00.1: Intel(R) Gigabit Ethernet Network Connection
[ 3.017415] igb 0000:03:00.1: eth1: (PCIe:5.0Gb/s:Width x4) 3c:a8:2a:5c:b7:75
[ 3.017702] igb 0000:03:00.1: eth1: PBA No: H73100-000
[ 3.017703] igb 0000:03:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
[ 3.047017] e1000e 0000:00:19.0 eth2: (PCI Express:2.5GT/s:Width x1) 40:b0:34:1e:c6:32
[ 3.047021] e1000e 0000:00:19.0 eth2: Intel(R) PRO/1000 Network Connection
[ 3.047047] e1000e 0000:00:19.0 eth2: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[ 3.069285] mpt2sas_cm0: CurrentHostPageSize is 0: Setting default host page size to 4k
[ 3.078541] igb 0000:03:00.2: added PHC on eth3
[ 3.078553] igb 0000:03:00.2: Intel(R) Gigabit Ethernet Network Connection
[ 3.078554] igb 0000:03:00.2: eth3: (PCIe:5.0Gb/s:Width x4) 3c:a8:2a:5c:b7:76
[ 3.078840] igb 0000:03:00.2: eth3: PBA No: H73100-000
[ 3.078841] igb 0000:03:00.2: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
[ 3.105684] mpt2sas_cm0: scatter gather: sge_in_main_msg(1), sge_per_chain(9), sge_per_io(128), chains_per_io(15)

[ 3.110648] mpt2sas_cm0: Scatter Gather Elements per IO(128)
[ 3.128059] tsc: Refined TSC clocksource calibration: 2593.992 MHz
[ 3.128081] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x25641074d3b, max_idle_ns: 440795244898 ns
[ 3.128208] clocksource: Switched to clocksource tsc
[ 3.133252] igb 0000:03:00.3: added PHC on eth4
[ 3.133265] igb 0000:03:00.3: Intel(R) Gigabit Ethernet Network Connection
[ 3.133266] igb 0000:03:00.3: eth4: (PCIe:5.0Gb/s:Width x4) 3c:a8:2a:5c:b7:77
[ 3.133553] igb 0000:03:00.3: eth4: PBA No: H73100-000
[ 3.133554] igb 0000:03:00.3: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
[ 3.154057] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 3.160162] mpt2sas_cm0: LSISAS2308: FWVersion(18.10.00.00), ChipRevision(0x05)
[ 3.160168] mpt2sas_cm0: Protocol=(Initiator), Capabilities=(Raid,TLR,EEDP,Snapshot Buffer,Diag Trace Buffer,Task Set Full,NCQ)
[ 3.160257] scsi host8: Fusion MPT SAS Host
[ 3.161340] mpt2sas_cm0: sending port enable !!
[ 3.161661] pps pps0: new PPS source ptp5
[ 3.161692] igb 0000:07:00.0: added PHC on eth5
[ 3.161711] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 3.161712] igb 0000:07:00.0: eth5: (PCIe:2.5Gb/s:Width x1) 40:b0:34:1e:c6:33
[ 3.161757] igb 0000:07:00.0: eth5: PBA No: 000400-000
[ 3.161758] igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)

[ 11.313032] nvme nvme0: 7/0/0 default/read/poll queues
[ 11.325070] igb 0000:03:00.0 ens6f0: renamed from eth0
[ 11.341110] e1000e 0000:00:19.0 eno1: renamed from eth2
[ 11.349717] nvme0n1: p1 p2 p3
[ 11.363126] igb 0000:03:00.3 ens6f3: renamed from eth4
[ 11.349717] nvme0n1: p1 p2 p3
[ 11.363126] igb 0000:03:00.3 ens6f3: renamed from eth4
[ 11.391129] igb 0000:07:00.0 enp7s0: renamed from eth5
[ 11.401261] igb 0000:03:00.2 ens6f2: renamed from eth3
[ 11.415172] igb 0000:03:00.1 ens6f1: renamed from eth1
[ 11.539055] usb 3-11: new low-speed USB device number 2 using xhci_hcd

[ 16.878964] RPC: Registered named UNIX socket transport module.
[ 16.878967] RPC: Registered udp transport module.
[ 16.878968] RPC: Registered tcp transport module.
[ 16.878969] RPC: Registered tcp-with-tls transport module.
[ 16.878969] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 17.548785] vmbr0: port 1(eno1) entered blocking state
[ 17.548790] vmbr0: port 1(eno1) entered disabled state
[ 17.548808] e1000e 0000:00:19.0 eno1: entered allmulticast mode
[ 17.817109] vmbr1: port 1(enp7s0) entered blocking state
[ 17.817115] vmbr1: port 1(enp7s0) entered disabled state
[ 17.817133] igb 0000:07:00.0 enp7s0: entered allmulticast mode
[ 19.682330] sctp: Hash tables configured (bind 4096/4096)
[ 20.691556] igb 0000:07:00.0 enp7s0: igb: enp7s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 20.801860] vmbr1: port 1(enp7s0) entered blocking state
[ 20.801860] vmbr1: port 1(enp7s0) entered blocking state
[ 20.801867] vmbr1: port 1(enp7s0) entered forwarding state
[ 20.944263] e1000e 0000:00:19.0 eno1: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 20.944313] vmbr0: port 1(eno1) entered blocking state
[ 20.944316] vmbr0: port 1(eno1) entered forwarding state
[ 28.562595] sda: sda1 sda2
[ 28.794902] sdd: sdd1 sdd2
[ 29.324562] kvm_intel: L1TF CPU bug present and SMT on, data leak possible. See CVE-2018-3646 and https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/>
[ 30.156786] tap100i0: entered promiscuous mode
[ 30.207080] vmbr0: port 2(fwpr100p0) entered blocking state
[ 30.207088] vmbr0: port 2(fwpr100p0) entered disabled state
[ 30.207111] fwpr100p0: entered allmulticast mode
[ 30.207189] fwpr100p0: entered promiscuous mode
[ 30.207530] e1000e 0000:00:19.0 eno1: entered promiscuous mode
[ 30.215321] vmbr0: port 2(fwpr100p0) entered blocking state
[ 30.215326] vmbr0: port 2(fwpr100p0) entered forwarding state
[ 30.270525] fwbr100i0: port 1(fwln100i0) entered blocking state
[ 30.270532] fwbr100i0: port 1(fwln100i0) entered disabled state
[ 30.270560] fwln100i0: entered allmulticast mode
[ 30.270609] fwln100i0: entered promiscuous mode
[ 30.270672] fwbr100i0: port 1(fwln100i0) entered blocking state
[ 30.270675] fwbr100i0: port 1(fwln100i0) entered forwarding state
[ 30.279150] fwbr100i0: port 2(tap100i0) entered blocking state
[ 30.279155] fwbr100i0: port 2(tap100i0) entered disabled state
[ 30.279171] tap100i0: entered allmulticast mode
[ 30.279238] fwbr100i0: port 2(tap100i0) entered blocking state
[ 30.279241] fwbr100i0: port 2(tap100i0) entered forwarding state
[27889.338362] snd_hda_codec_hdmi hdaudioC1D0: HDMI: audio coding type 0 not expected
[27889.338369] snd_hda_codec_hdmi hdaudioC1D0: HDMI: audio coding type 0 not expected
[27889.338371] snd_hda_codec_hdmi hdaudioC1D0: HDMI: audio coding type 0 not expected
[28675.729050] perf: interrupt took too long (2502 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
[41872.887596] perf: interrupt took too long (3146 > 3127), lowering kernel.perf_event_max_sample_rate to 63000
[65810.128395] perf: interrupt took too long (3941 > 3932), lowering kernel.perf_event_max_sample_rate to 50000
[99546.350391] perf: interrupt took too long (4947 > 4926), lowering kernel.perf_event_max_sample_rate to 40000


Thank you for all your help! And I apologize for the length of the output.

Frank D Gunseor
 
You must log in or register to reply here.
Top Bottom