Hello,
We are testing proxmox/drbd with two simple machine.
On each server, sda = 160Go and sdb = 80Go
In the initial installation, both nodes had one network card.
the node1 was 172.16.5.98 and node2 was 172.16.5.97. The vmbr0 was created and everything worked fine.
Now, we added on each node another card to be able to administrate Proxmox via web and i dont really understand how to do this.
- On node1, eth0 is connected on main network and this is by this interface we administrate Proxmox. The second card is eth1 and is dedicated to DRBD.
- On node2, eth0 is disconnected and eth1 is connected directly to eth1 of node1 via crossed cable.
So how can i configure my network to be able to administrate Proxmox via eth0 from node1 (IP will be 172.16.3.200) and let the eth0 cards of the two nodes dedicated to DRBD ? I try many configurations but nothing work.
Sorry if it's not clear...i'am not english !
Thank you for any response...
We are testing proxmox/drbd with two simple machine.
On each server, sda = 160Go and sdb = 80Go
In the initial installation, both nodes had one network card.
the node1 was 172.16.5.98 and node2 was 172.16.5.97. The vmbr0 was created and everything worked fine.
Now, we added on each node another card to be able to administrate Proxmox via web and i dont really understand how to do this.
- On node1, eth0 is connected on main network and this is by this interface we administrate Proxmox. The second card is eth1 and is dedicated to DRBD.
- On node2, eth0 is disconnected and eth1 is connected directly to eth1 of node1 via crossed cable.
So how can i configure my network to be able to administrate Proxmox via eth0 from node1 (IP will be 172.16.3.200) and let the eth0 cards of the two nodes dedicated to DRBD ? I try many configurations but nothing work.
Sorry if it's not clear...i'am not english !
Thank you for any response...