Hello everyone,
I am currently facing the following problem:
I have a Proxmox cluster in operation for the first time, which I wanted to operate directly via the 10G NICs on the individual servers without a switch in between. The problem is that the network collapses as soon as I assign the individual IP addresses in the transfer network and the servers are therefore no longer accessible to each other. However, they remain online via their static host IP and I can access all 3 servers via SSH (web interface also still works). I have already tried various configurations in the interfaces, but each time the connection between the servers is interrupted. The join is accepted normally, and then it breaks off at some point during the join. Does anyone here have a tip as to what the problem could be, or perhaps even instructions on how to structure this, I haven't found anything myself.
Thanks in advance
I am currently facing the following problem:
I have a Proxmox cluster in operation for the first time, which I wanted to operate directly via the 10G NICs on the individual servers without a switch in between. The problem is that the network collapses as soon as I assign the individual IP addresses in the transfer network and the servers are therefore no longer accessible to each other. However, they remain online via their static host IP and I can access all 3 servers via SSH (web interface also still works). I have already tried various configurations in the interfaces, but each time the connection between the servers is interrupted. The join is accepted normally, and then it breaks off at some point during the join. Does anyone here have a tip as to what the problem could be, or perhaps even instructions on how to structure this, I haven't found anything myself.
Thanks in advance
