Hello every One. Besides the following:
http://pve.proxmox.com/wiki/Two-Node_High_Availability_Cluster#Quorum_Disk_Configuration
Are there any other documentation regarding Quorum disk?
Specifically what I have done is to create a Quorum disk using a shared drive between two nodes with the following steps:
- Created a LVM (type 8e) using fdisk.
- Used the following command:
root@vpshost49:~# mkqdisk -c /dev/sdd1 -l cluster1_qdisk
mkqdisk v1349169030
Writing new quorum disk label 'cluster1_qdisk' to /dev/sdd1.
WARNING: About to destroy all data on /dev/sdd1; proceed [N/y] ? y
Warning: Initializing previously initialized partition
Initializing status block for node 1...
Initializing status block for node 2...
Initializing status block for node 3...
Initializing status block for node 4...
Initializing status block for node 5...
Initializing status block for node 6...
Initializing status block for node 7...
Initializing status block for node 8...
Initializing status block for node 9...
Initializing status block for node 10...
Initializing status block for node 11...
Initializing status block for node 12...
Initializing status block for node 13...
Initializing status block for node 14...
Initializing status block for node 15...
Initializing status block for node 16...
My questions:
Am I using the correct file system type (8e)?
Besides the following entry in /etc/pve/cluster.conf do I make a reference to this quorum disk else where?
As asked at the begining of this threadL Are there any other documentation regarding Quorum disk?
http://pve.proxmox.com/wiki/Two-Node_High_Availability_Cluster#Quorum_Disk_Configuration
Are there any other documentation regarding Quorum disk?
Specifically what I have done is to create a Quorum disk using a shared drive between two nodes with the following steps:
- Created a LVM (type 8e) using fdisk.
- Used the following command:
root@vpshost49:~# mkqdisk -c /dev/sdd1 -l cluster1_qdisk
mkqdisk v1349169030
Writing new quorum disk label 'cluster1_qdisk' to /dev/sdd1.
WARNING: About to destroy all data on /dev/sdd1; proceed [N/y] ? y
Warning: Initializing previously initialized partition
Initializing status block for node 1...
Initializing status block for node 2...
Initializing status block for node 3...
Initializing status block for node 4...
Initializing status block for node 5...
Initializing status block for node 6...
Initializing status block for node 7...
Initializing status block for node 8...
Initializing status block for node 9...
Initializing status block for node 10...
Initializing status block for node 11...
Initializing status block for node 12...
Initializing status block for node 13...
Initializing status block for node 14...
Initializing status block for node 15...
Initializing status block for node 16...
My questions:
Am I using the correct file system type (8e)?
Besides the following entry in /etc/pve/cluster.conf do I make a reference to this quorum disk else where?
As asked at the begining of this threadL Are there any other documentation regarding Quorum disk?