proxmox 8 installation failed

[nbanik]

Hi Experts,
Trying to install proxmox 8.1.2 in HPE DL380 server
But getting below error:


Please help me.

 

[Guillaume Delanoy]

Hello,

Since you also seem to have problems installing PVE 7.4 (see other thread), I would check the hard drive for bad cluster, or the installation media in case you use an old usb stick or burned to old DVD.

 

[ThoSo]

Try again and use graphical installer - works much better than text Console.

 

[nbanik]

Try again and use graphical installer - works much better than text Console.

Hello,

Since you also seem to have problems installing PVE 7.4 (see other thread), I would check the hard drive for bad cluster, or the installation media in case you use an old usb stick or burned to old DVD.

Yes,i'm getting error in version 7 and 8 both.
After downloading, i checked the chksum, it perfectly matches.

I uploaded to ILO of HPE console as a ISO media....then it start installation and at the end i got the error.

 

[bbgeek17]

I uploaded to ILO of HPE console as a ISO media....then it start installation and at the end i got the error.

I am not an expert on ILO.

Do you really "upload" an arbitrary-size ISO into ILO? Or do you mount the ISO over the network as virtual media (similar to iDRAC)? If it's the latter, your network connectivity may be deficient (too slow, lost packets, wrong MTU, slow source, etc). I'd recommend burning the ISO to a reliable USB and trying the installation that way.

---

Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox

 

[ThoSo]

What happen, when you write ISO image on a CD or USB Stick and install it from USB oder CD-ROM?
I have created a USB Stick using Ventoy, so you can save many ISO Images on one Stick. So i Boot from Ventoy usring normal grub Mode. Test with an DELL Poweredge T320 and Terra mini Server.

 

[nbanik]

Try again and use graphical installer - works much better than text Console.

Succeed. After severals try.