Proxmox 7.3.1 and MINISFORUM DeskMini UM350 Mini PC

A

alsmith

New Member
Jan 28, 2023
4
0
1
I imstalled Proxmox 7.3.1 on my MINISFORUM DeskMini UM350 Mini PC - AMD Ryzen 5 3550H DDR4 16GB RAM + 512GB NVMe SSD Desktop Computer. I am trying to install MacOS BigSur or Ventura). When I get to the CPU i see no option similar so I chose the EPYC. I then chose the IDE2 with OpenCore v19 as the 1st choice.
I am unable to get it to start.
Code: 
kvm: warning: host doesn't support requested feature: CPUID.01H:ECX.pcid [bit 17]
kvm: warning: host doesn't support requested feature: CPUID.80000001H:ECX.fma4 [bit 16]
kvm: warning: host doesn't support requested feature: CPUID.01H:ECX.pcid [bit 17]
kvm: warning: host doesn't support requested feature: CPUID.80000001H:ECX.fma4 [bit 16]
kvm: warning: host doesn't support requested feature: CPUID.01H:ECX.pcid [bit 17]
kvm: warning: host doesn't support requested feature: CPUID.80000001H:ECX.fma4 [bit 16]
kvm: warning: host doesn't support requested feature: CPUID.01H:ECX.pcid [bit 17]
kvm: warning: host doesn't support requested feature: CPUID.80000001H:ECX.fma4 [bit 16]
kvm: -device ide-hd,bus=ide.0,unit=1,drive=drive-ide1,id=ide1,bootindex=103: Can't create IDE unit 1, bus supports only 1 units
TASK ERROR: start failed: QEMU exited with code 1

Not quite sure I understand what this means and what I might be able to do..
Any suggestions.
 
Try "host" as CPU type. Don'T select a CPU architecture that doesn`t match your hardware.
 
when i tried to start the VM i got
Code: 
kvm: warning: host doesn't support requested feature: CPUID.01H:ECX.pcid [bit 17]
kvm: warning: host doesn't support requested feature: CPUID.80000001H:ECX.fma4 [bit 16]
kvm: warning: host doesn't support requested feature: CPUID.01H:ECX.pcid [bit 17]
kvm: warning: host doesn't support requested feature: CPUID.80000001H:ECX.fma4 [bit 16]
kvm: warning: host doesn't support requested feature: CPUID.01H:ECX.pcid [bit 17]
kvm: warning: host doesn't support requested feature: CPUID.80000001H:ECX.fma4 [bit 16]
kvm: warning: host doesn't support requested feature: CPUID.01H:ECX.pcid [bit 17]
kvm: warning: host doesn't support requested feature: CPUID.80000001H:ECX.fma4 [bit 16]
kvm: -device ide-hd,bus=ide.0,unit=1,drive=drive-ide1,id=ide1,bootindex=103: Can't create IDE unit 1, bus supports only 1 units
TASK ERROR: start failed: QEMU exited with code 1
I attached a screen shot
 
looks like my screenshot did not make it.
 

Attachments

  • Screen Shot 2023-01-28 at 10.50.39 AM.png
    Screen Shot 2023-01-28 at 10.50.39 AM.png
    110 KB · Views: 21
Cache mode "unsafe" is also called that because your data will be unsafe and for example power outage might destroy entire filesystems...just as an reminder. Nothing that I personally would use with such consumer hardware.
 
You must log in or register to reply here.
Top Bottom