Hi,
I am a happy Proxmox 2.1 user
I needed to start a new cluster so I decided to use the NEWEST version ( see below)
The problem is that none of my volumes from HP MSA2012sa are being recognized
most likely because qla2xxx module is not loaded
Even after loading it manually, a rescan-scsi-bus.sh yields nothing
The same hardware works on my other cluster using WORKING version
Any help, suggestions will be greatly appreciated
WORKING
pveversion -vpve-manager: 2.2-31 (pve-manager/2.2/e94e95e9)
running kernel: 2.6.32-16-pve
proxmox-ve-2.6.32: 2.2-82
pve-kernel-2.6.32-11-pve: 2.6.32-66
pve-kernel-2.6.32-16-pve: 2.6.32-82
pve-kernel-2.6.32-14-pve: 2.6.32-74
lvm2: 2.02.95-1pve2
clvm: 2.02.95-1pve2
corosync-pve: 1.4.4-1
openais-pve: 1.1.4-2
libqb: 0.10.1-2
redhat-cluster-pve: 3.1.93-2
resource-agents-pve: 3.9.2-3
fence-agents-pve: 3.1.9-1
pve-cluster: 1.0-33
qemu-server: 2.0-69
pve-firmware: 1.0-21
libpve-common-perl: 1.0-39
libpve-access-control: 1.0-25
libpve-storage-perl: 2.0-36
vncterm: 1.0-3
vzctl: 4.0-1pve2
vzprocps: 2.0.11-2
vzquota: 3.1-1
pve-qemu-kvm: 1.2-7
ksm-control-daemon: 1.1-1
NEWEST
pveversion -v
pve-manager: 2.3-13 (pve-manager/2.3/7946f1f1)
running kernel: 2.6.32-19-pve
proxmox-ve-2.6.32: 2.3-93
pve-kernel-2.6.32-19-pve: 2.6.32-93
pve-kernel-2.6.32-18-pve: 2.6.32-88
lvm2: 2.02.95-1pve2
clvm: 2.02.95-1pve2
corosync-pve: 1.4.4-4
openais-pve: 1.1.4-2
libqb: 0.10.1-2
redhat-cluster-pve: 3.1.93-2
resource-agents-pve: 3.9.2-3
fence-agents-pve: 3.1.9-1
pve-cluster: 1.0-36
qemu-server: 2.3-18
pve-firmware: 1.0-21
libpve-common-perl: 1.0-49
libpve-access-control: 1.0-26
libpve-storage-perl: 2.3-6
vncterm: 1.0-3
vzctl: 4.0-1pve2
vzprocps: 2.0.11-2
vzquota: 3.1-1
pve-qemu-kvm: 1.4-8
ksm-control-daemon: 1.1-1
I am a happy Proxmox 2.1 user
I needed to start a new cluster so I decided to use the NEWEST version ( see below)
The problem is that none of my volumes from HP MSA2012sa are being recognized
most likely because qla2xxx module is not loaded
Even after loading it manually, a rescan-scsi-bus.sh yields nothing
The same hardware works on my other cluster using WORKING version
Any help, suggestions will be greatly appreciated
WORKING
pveversion -vpve-manager: 2.2-31 (pve-manager/2.2/e94e95e9)
running kernel: 2.6.32-16-pve
proxmox-ve-2.6.32: 2.2-82
pve-kernel-2.6.32-11-pve: 2.6.32-66
pve-kernel-2.6.32-16-pve: 2.6.32-82
pve-kernel-2.6.32-14-pve: 2.6.32-74
lvm2: 2.02.95-1pve2
clvm: 2.02.95-1pve2
corosync-pve: 1.4.4-1
openais-pve: 1.1.4-2
libqb: 0.10.1-2
redhat-cluster-pve: 3.1.93-2
resource-agents-pve: 3.9.2-3
fence-agents-pve: 3.1.9-1
pve-cluster: 1.0-33
qemu-server: 2.0-69
pve-firmware: 1.0-21
libpve-common-perl: 1.0-39
libpve-access-control: 1.0-25
libpve-storage-perl: 2.0-36
vncterm: 1.0-3
vzctl: 4.0-1pve2
vzprocps: 2.0.11-2
vzquota: 3.1-1
pve-qemu-kvm: 1.2-7
ksm-control-daemon: 1.1-1
NEWEST
pveversion -v
pve-manager: 2.3-13 (pve-manager/2.3/7946f1f1)
running kernel: 2.6.32-19-pve
proxmox-ve-2.6.32: 2.3-93
pve-kernel-2.6.32-19-pve: 2.6.32-93
pve-kernel-2.6.32-18-pve: 2.6.32-88
lvm2: 2.02.95-1pve2
clvm: 2.02.95-1pve2
corosync-pve: 1.4.4-4
openais-pve: 1.1.4-2
libqb: 0.10.1-2
redhat-cluster-pve: 3.1.93-2
resource-agents-pve: 3.9.2-3
fence-agents-pve: 3.1.9-1
pve-cluster: 1.0-36
qemu-server: 2.3-18
pve-firmware: 1.0-21
libpve-common-perl: 1.0-49
libpve-access-control: 1.0-26
libpve-storage-perl: 2.3-6
vncterm: 1.0-3
vzctl: 4.0-1pve2
vzprocps: 2.0.11-2
vzquota: 3.1-1
pve-qemu-kvm: 1.4-8
ksm-control-daemon: 1.1-1