problem update to 1.6

K

kobe

New Member
Jun 20, 2009
7
0
1
hello, i did try to update from 1.5 to 1.6 and got some errors by trying to install the new kernel.

after reboot i only was able to boot an older kernel. (error 15 file not found)

sources are ok.

upgrade brings the following output.

Code: 
aptitude upgrade
W: The "upgrade" command is deprecated; use "safe-upgrade" instead.
Reading package lists... Done
Building dependency tree       
Reading state information... Done
Reading extended state information      
Initializing package states... Done
Reading task descriptions... Done  
The following partially installed packages will be configured:
  proxmox-ve-2.6.32 pve-headers-2.6.32-3-pve 
0 packages upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 0B of archives. After unpacking 0B will be used.
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
    LANGUAGE = (unset),
    LC_ALL = (unset),
    LANG = "de_AT.utf8"
    are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
Setting up pve-headers-2.6.32-3-pve (2.6.32-13) ...
ln: creating symbolic link `/lib/modules/2.6.32-3-pve/build': No such file or directory
dpkg: error processing pve-headers-2.6.32-3-pve (--configure):
 subprocess post-installation script returned error exit status 1
dpkg: dependency problems prevent configuration of proxmox-ve-2.6.32:
 proxmox-ve-2.6.32 depends on pve-kernel-2.6.32-3-pve; however:
  Package pve-kernel-2.6.32-3-pve is not installed.
  Package pve-headers-2.6.32-3-pve which provides pve-kernel-2.6.32-3-pve is not configured yet.
dpkg: error processing proxmox-ve-2.6.32 (--configure):
 dependency problems - leaving unconfigured
Errors were encountered while processing:
 pve-headers-2.6.32-3-pve
 proxmox-ve-2.6.32
E: Sub-process /usr/bin/dpkg returned an error code (1)
A package failed to install.  Trying to recover:
Setting up pve-headers-2.6.32-3-pve (2.6.32-13) ...
ln: creating symbolic link `/lib/modules/2.6.32-3-pve/build': No such file or directory
dpkg: error processing pve-headers-2.6.32-3-pve (--configure):
 subprocess post-installation script returned error exit status 1
dpkg: dependency problems prevent configuration of proxmox-ve-2.6.32:
 proxmox-ve-2.6.32 depends on pve-kernel-2.6.32-3-pve; however:
  Package pve-kernel-2.6.32-3-pve is not installed.
  Package pve-headers-2.6.32-3-pve which provides pve-kernel-2.6.32-3-pve is not configured yet.
dpkg: error processing proxmox-ve-2.6.32 (--configure):
 dependency problems - leaving unconfigured
Errors were encountered while processing:
 pve-headers-2.6.32-3-pve
 proxmox-ve-2.6.32
Reading package lists... Done
Building dependency tree       
Reading state information... Done
Reading extended state information      
Initializing package states... Done
Reading task descriptions... Done
Code: 
aptitude install proxmox-ve-2.6.32
Reading package lists... Done
Building dependency tree       
Reading state information... Done
Reading extended state information      
Initializing package states... Done
Reading task descriptions... Done  
The following partially installed packages will be configured:
  proxmox-ve-2.6.32 pve-headers-2.6.32-3-pve 
0 packages upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 0B of archives. After unpacking 0B will be used.
Writing extended state information... Done
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
    LANGUAGE = (unset),
    LC_ALL = (unset),
    LANG = "de_AT.utf8"
    are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
Setting up pve-headers-2.6.32-3-pve (2.6.32-13) ...
ln: creating symbolic link `/lib/modules/2.6.32-3-pve/build': No such file or directory
dpkg: error processing pve-headers-2.6.32-3-pve (--configure):
 subprocess post-installation script returned error exit status 1
dpkg: dependency problems prevent configuration of proxmox-ve-2.6.32:
 proxmox-ve-2.6.32 depends on pve-kernel-2.6.32-3-pve; however:
  Package pve-kernel-2.6.32-3-pve is not installed.
  Package pve-headers-2.6.32-3-pve which provides pve-kernel-2.6.32-3-pve is not configured yet.
dpkg: error processing proxmox-ve-2.6.32 (--configure):
 dependency problems - leaving unconfigured
Errors were encountered while processing:
 pve-headers-2.6.32-3-pve
 proxmox-ve-2.6.32
E: Sub-process /usr/bin/dpkg returned an error code (1)
A package failed to install.  Trying to recover:
Setting up pve-headers-2.6.32-3-pve (2.6.32-13) ...
ln: creating symbolic link `/lib/modules/2.6.32-3-pve/build': No such file or directory
dpkg: error processing pve-headers-2.6.32-3-pve (--configure):
 subprocess post-installation script returned error exit status 1
dpkg: dependency problems prevent configuration of proxmox-ve-2.6.32:
 proxmox-ve-2.6.32 depends on pve-kernel-2.6.32-3-pve; however:
  Package pve-kernel-2.6.32-3-pve is not installed.
  Package pve-headers-2.6.32-3-pve which provides pve-kernel-2.6.32-3-pve is not configured yet.
dpkg: error processing proxmox-ve-2.6.32 (--configure):
 dependency problems - leaving unconfigured
Errors were encountered while processing:
 pve-headers-2.6.32-3-pve
 proxmox-ve-2.6.32
Reading package lists... Done             
Building dependency tree       
Reading state information... Done
Reading extended state information      
Initializing package states... Done
Reading task descriptions... Done
some idea?
 
Installed: "aptitude install proxmox-ve-2.6.32" - have ceased to be loaded windows (XP)-machines. Similar loader windows doesn't see a disk. Has returned on 2.6.24 - all works. Pve-manager/1.6/5087 and Linux 2.6.24-12-pve won't create problems?
 
Last edited:
actually i dont have a hp server. i've got 2 machines with asus mainboards and intel processors etc.
 
Package pve-kernel-2.6.32-3-pve is not installed.
Package pve-headers-2.6.32-3-pve which provides pve-kernel-2.6.32-3-pve is not configured yet.
Click to expand...

well, you did not finish installation. Please run aptitude, and remove
pve-headers-2.6.32-3-pve (not needed). Then configure/reinstall the new kernel.
 
uninstalling the headers and reinstalling the kernel solved the problem.


thank you very much. proxmox rules!
 
You must log in or register to reply here.
Top Bottom