Passthrough USB device with the same ID

[imox]

Hello,

I have two printers with the same ID. I don't know what I should do to passthrough both devices. I passthrough my devices with this command: qm set VMID -usb0 host=DEVICE_ID

Here is lsusb twice LabelWriter 450:

root@proxmox:~# lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 009: ID 03f0:1e17 Hewlett-Packard LaserJet 1160 series
Bus 001 Device 008: ID 04f3:0110 Elan Microelectronics Corp.
Bus 004 Device 003: ID 174c:5106 ASMedia Technology Inc. Transcend StoreJet 25M3
Bus 001 Device 003: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port
Bus 003 Device 011: ID 0922:0020 Dymo-CoStar Corp. LabelWriter 450
Bus 003 Device 008: ID 03f0:3a17 Hewlett-Packard Printing Support
Bus 001 Device 012: ID 0922:0020 Dymo-CoStar Corp. LabelWriter 450

 

[p3x-749]

...check this out: http://forum.proxmox.com/threads/10...rwarded-to-two-different-VM?p=59129#post59129