Greetings everybody,
The last couple of days I've been trying to look for a nice virtualization panel / system, and proxmox is what I ended up with and what I'm happy with.
However, I installed it on a clean Debian installation using the following guide:
https://pve.proxmox.com/wiki/Install_Proxmox_VE_on_Debian_Wheezy
The VM is running just fine and all, except for the network part. I've been strugling with this network issue for days now and checked out many guides / info ( from this forum aswell ), but couldn't seem to make it work.
tcpdump shows I'm pinging to an outside domain using the virtual machine ( google.nl, NIC=VMBR0 ):
However, this always times out.
The DNS does not seem to work neither as I cannot simply ping to google.nl.
My host /etc/network/interfaces:
Settings on Windows server 2008 guest:
I tried the host address as the gateway aswell, but didn't work.
Using the failover ip with .254 does not work neither.
The vm has a E1000 network adapter with the mac address I received as "Virtual MAC" from ovh.
Could perhaps somebody assist me?
The last couple of days I've been trying to look for a nice virtualization panel / system, and proxmox is what I ended up with and what I'm happy with.
However, I installed it on a clean Debian installation using the following guide:
https://pve.proxmox.com/wiki/Install_Proxmox_VE_on_Debian_Wheezy
The VM is running just fine and all, except for the network part. I've been strugling with this network issue for days now and checked out many guides / info ( from this forum aswell ), but couldn't seem to make it work.
tcpdump shows I'm pinging to an outside domain using the virtual machine ( google.nl, NIC=VMBR0 ):
Code:
94.23.xx.xx > ea-in-f94.1e100.net: ICMP echo request, id 1, seq 14, length 40The DNS does not seem to work neither as I cannot simply ping to google.nl.
My host /etc/network/interfaces:
Code:
auto eth0
iface eth0 inet static
address 37.187.xx.xx
netmask 255.255.255.0
network 37.187.74.0
broadcast 37.187.74.255
gateway 37.187.74.254
pointopoint 37.187.74.254
auto vmbr0
iface vmbr0 inet static
address 37.187.xx.xx
netmask 255.255.255.255
bridge_ports none
bridge_stp off
bridge_fd 0
up ip route add 94.23.xx.xx dev vmbr0Settings on Windows server 2008 guest:
Code:
IPV4:
- IP Address: 94.23.xx.xx
- Subnet mask: 255.255.255.255
- Gateway: 37.187.74.254
IPV6: disabledUsing the failover ip with .254 does not work neither.
The vm has a E1000 network adapter with the mac address I received as "Virtual MAC" from ovh.
Could perhaps somebody assist me?
Last edited:
