NO VNC console Disconnect 1006 NEW

AntoWkill

Member
Jul 31, 2013
73
1
6
Hello,
From today without do nothing my novnc console stop working, its load and i can see the vm screen for 1-2 second and after disconnect and recharge.

The error is with ALL browser, i have also tried from Mobile Phone and i have the same error.

How can i solve this problem?


Problem found but not the solution: IF I ENABLE SSLV3 (FORCED) in: /usr/share/perl5/PVE/Service/pveproxy.pm the VNC CONSOLE start again to WORK. So the problem is TLS.





proxmox-ve: 4.4-95 (running kernel: 4.4.15-1-pve)
pve-manager: 4.4-18 (running version: 4.4-18/ef2610e8)
pve-kernel-4.4.79-1-pve: 4.4.79-95
pve-kernel-4.4.15-1-pve: 4.4.15-60
pve-kernel-4.2.8-1-pve: 4.2.8-41
pve-kernel-4.4.76-1-pve: 4.4.76-94
lvm2: 2.02.116-pve3
corosync-pve: 2.4.2-2~pve4+1
libqb0: 1.0.1-1 pve-cluster: 4.0-52
qemu-server: 4.0-112
pve-firmware: 1.1-11
libpve-common-perl: 4.0-96
libpve-access-control: 4.0-23
libpve-storage-perl: 4.0-76
pve-libspice-server1: 0.12.8-2
vncterm: 1.3-2
pve-docs: 4.4-4
pve-qemu-kvm: 2.7.1-4
pve-container: 1.0-101
pve-firewall: 2.0-33
pve-ha-manager: 1.0-41
ksm-control-daemon: 1.2-1
glusterfs-client: 3.5.2-2+deb8u3
lxc-pve: 2.0.7-4
lxcfs: 2.0.6-pve1
criu: 1.6.0-1
novnc-pve: 0.5-9
smartmontools: 6.5+svn4324-1~pve80
zfsutils: 0.6.5.9-pve15~bpo80
 
Last edited:
are you sure the VM is running ?
what is the output of

qm status my_vm_id

or

pct status my_ct_id

if you have a container here
 
qm status 100
status: running
Of course the vm is running, and the problem is with ALL vm with ALL device.

I post a video of strage beheviur for the console, who with a good connection open the screen for 5-10second and after reload again without do nothing.

 
set 25 12:52:29 ns3008621 pveproxy[372]: problem with client XXXX; ssl3_read_bytes: sslv3 alert bad certificate
I've already tried both letsencrypt and with the default certificate (the error becomes sslv3 alert unknown ca)

Please help!
 
Also, spiceproxy have problem: Sep 25 16:41:51 ns3008621 spiceproxy[2340]: problem with client XXXXXX;
Connection terminated by the correspondent
 
Problem found but not the solution: IF I ENABLE SSLV3 (FORCED) in: /usr/share/perl5/PVE/Service/pveproxy.pm the VNC CONSOLE start again to WORK. So the problem is TLS. @dcsapak @manu
 
Same problem for me: no console running if I access it via nginx reverse proxy. Accessing directly on port 8006, it works ....
 
no idea... do you use commercial/self-signed certificates (i mean not the autogenerated ones)?
do you use client certificates in your browsers?
did you set to trust the certificate pve uses?
do you have a proxy inbetween you and the pve host?
is your connection very slow?
 
no idea... do you use commercial/self-signed certificates (i mean not the autogenerated ones)?
do you use client certificates in your browsers?
did you set to trust the certificate pve uses?
do you have a proxy inbetween you and the pve host?
is your connection very slow?


I have installed LetEncrypy 1 month ago (so the problem isn't connected) already tried to remove it a
 
first, please stop deleting your posts, only to write it again to bump your post, if nobody answers, this most often has a reason (not knowing what the problem is, etc.)
second, i do not have a clue why it does not work for you, and i never saw this myself
you ruled out your certificates, but maybe you should consider this again and reset your certificates with
Code:
pvecm updatecerts --force

to try if this was your problem
 

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get yours easily in our online shop.

Buy now!