Nic issues?

beautron7

New Member
Mar 7, 2015
3
0
1
hello,
i am trying to install proxmox and i have had lots of trouble. i finaly got it installed and the webserver doesnt load. i also cant successfully ping it. i have the ip at default settings but my dhcp range is from 192.168.1.2 to 192.168.1.200. so the ip is out of the range of my network. that may cause issues, but after switching my dchp settings to 192.168.100.2-200, it shows up but i cant connect. im not sure what else i can do to isolate the problem, im using the integrated nic on an old dell WS pc with a xeon. i was running pfsense as a router on it and the nic worked fine, but now im not sure if it is working. is there something im missing here?

my router is cuttently a new airport extreme if that is usefull
 
What hardware are you trying to install proxmox on?
A Dell Precision T3500. i think i mentioned that somewhere

dells website lists the nic as

  • Integrated Broadcom® 5761 Gigabit Ethernet controller with Remote Wake UP and PXE support Dell 56K v.92 Data/Fax PCI modem
 
Last edited:
I've installed it on a T3400, so a T3500 should work.

Try re-downloading it again and install.