[SOLVED] Networking Help

spero

New Member
Jan 29, 2025
2
0
1
Hi, recently installed some new drives and RAM and can no longer connect to my proxmox server, haven't been able to figure it out myself.
I also rebooted my router/changed the dns back to isp default from pihole so internet wasn't down while the server was down.

Things I've tried/info:
  • The Ethernet cable and port are fine (Internet worked booting windows from another drive)
  • I turned wake from lan on in bios while I was upgrading things (turned back off/reset cmos, hasn't helped)
  • Router says server hasn't connected since I shut it down to do the upgrade
  • included pictures of ip a/ systemctl network status/ "etc/network/interfaces" contents
    (succesful network status check is from commenting "auto vmbr0" out as a troubleshooting step(didn't fix connection)
  • I should be on the same subnet on the computers I'm attempting to connect with
  • Happy to provide more pictures/info if needed

    Any help is appreciated (sorry if I'm doing something dumb, still new to this stuff)

  • IMG_0549.jpgIMG_0546.jpgIMG_0545.jpgIMG_0548.jpg
 
In the first screenshot, I see a enp3s0. In your bridge configuration you have enp2s0.
Change the two enp2s0 in your /etc/network/interfaces to enp3s0
 
  • Like
Reactions: spero