Network card disabled after booting up.

[longlegg]

Hi,
My proxmox was fully functionell until I did a reboot after running this line.
bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/misc/post-pve-install.sh)"
Then I made a reboot. Nothing else was done.

The network led´s for link activity turns black when proxmox starts.

Dmesg give these errors






I have tried to load older kernels without success.
When I´m at this promt the network activiy led are flashing but once one of below lines starts the network link goes down.

 

[cheiss]

Hi,

My proxmox was fully functionell until I did a reboot after running this line.
bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/misc/post-pve-install.sh)"

First of, please don't just run random scripts off the internet on your box, without knowing exactly what they do.
From a quick look it seems to just run an apt dist-upgrade - but again, don't just run random scripts.

Can you please the output of pveversion -v and especially ip a?
That should help investigate this problem further.

 

[longlegg]

Hi, thank you for the advice. I folllowed a guide that I thought should work but I was naive.
Here are the outputs from the commands.

 

[inxamc]

Hey longlegg,

Try this:
First check your repositories in: /etc/apt/sources.list
and if applicable in: /etc/apt/sources.list.d/
If you need a configuration example, you should read:
https://pve.proxmox.com/wiki/Upgrade_from_7_to_8
Especially check section: Add the Proxmox VE 8 Package Repository
Then you may follow:
https://forum.proxmox.com/threads/proxmox-update-issue-not-correctly-installed.32245/

Hope this will help...

P.S. Pls. paste the output of cli commands using the editors' code-function and not as screenshot.
If you want to edit it, redirect it into a file and paste the content using the code-function or attach the file.

​

 

[longlegg]

Hey longlegg,

Try this:
First check your repositories in: /etc/apt/sources.list
and if applicable in: /etc/apt/sources.list.d/
If you need a configuration example, you should read:
https://pve.proxmox.com/wiki/Upgrade_from_7_to_8
Especially check section: Add the Proxmox VE 8 Package Repository
Then you may follow:
https://forum.proxmox.com/threads/proxmox-update-issue-not-correctly-installed.32245/

Hope this will help...

P.S. Pls. paste the output of cli commands using the editors' code-function and not as screenshot.
If you want to edit it, redirect it into a file and paste the content using the code-function or attach the file.

​

Hi and thank you, I guess I can somehow connect a USB stick and mount it and copy the output to the USB but have not figure out it yet so it was easier for me with screenshot since I only can not use remote putty.
/etc/apt/sources.list had 3 lines.
/etc/apt/sources.list.d/ did not exist.

 

[longlegg]

I took a chance and run apt --fix-broken install and the network come back so now I can access the webgui and SSH to the proxmox.
I'm now on pve-manager/8.1.4/ec5affc9e41f1d79 (running kernel: 6.5.11-7-pve)



proxmox-ve: 8.1.0 (running kernel: 6.5.11-7-pve)
pve-manager: 8.1.4 (running version: 8.1.4/ec5affc9e41f1d79)
proxmox-kernel-helper: 8.1.0
pve-kernel-6.2: 8.0.5
pve-kernel-5.15: 7.4-4
proxmox-kernel-6.5: 6.5.11-7
proxmox-kernel-6.5.11-7-pve-signed: 6.5.11-7
proxmox-kernel-6.2.16-20-pve: 6.2.16-20
proxmox-kernel-6.2: 6.2.16-20
pve-kernel-6.2.16-3-pve: 6.2.16-3
pve-kernel-5.15.108-1-pve: 5.15.108-1
pve-kernel-5.15.102-1-pve: 5.15.102-1
pve-kernel-5.15.74-1-pve: 5.15.74-1
pve-kernel-5.15.53-1-pve: 5.15.53-1
pve-kernel-5.15.39-3-pve: 5.15.39-3
ceph-fuse: 17.2.7-pve2
corosync: 3.1.7-pve3
criu: 3.17.1-2
glusterfs-client: 10.3-5
ifupdown2: 3.2.0-1+pmx8
ksm-control-daemon: 1.4-1
libjs-extjs: 7.0.0-4
libknet1: 1.28-pve1
libproxmox-acme-perl: 1.5.0
libproxmox-backup-qemu0: 1.4.1
libproxmox-rs-perl: 0.3.3
libpve-access-control: 8.0.7
libpve-apiclient-perl: 3.3.1
libpve-common-perl: 8.1.0
libpve-guest-common-perl: 5.0.6
libpve-http-server-perl: 5.0.5
libpve-network-perl: 0.9.5
libpve-rs-perl: 0.8.8
libpve-storage-perl: 8.0.5
libspice-server1: 0.15.1-1
lvm2: 2.03.16-2
lxc-pve: 5.0.2-4
lxcfs: 5.0.3-pve4
novnc-pve: 1.4.0-3
proxmox-backup-client: 3.1.2-1
proxmox-backup-file-restore: 3.1.2-1
proxmox-kernel-helper: 8.1.0
proxmox-mail-forward: 0.2.3
proxmox-mini-journalreader: 1.4.0
proxmox-offline-mirror-helper: 0.6.4
proxmox-widget-toolkit: 4.1.3
pve-cluster: 8.0.5
pve-container: 5.0.8
pve-docs: 8.1.3
pve-edk2-firmware: 4.2023.08-3
pve-firewall: 5.0.3
pve-firmware: 3.9-1
pve-ha-manager: 4.0.3
pve-i18n: 3.2.0
pve-qemu-kvm: 8.1.2-6
pve-xtermjs: 5.3.0-3
qemu-server: 8.0.10
smartmontools: 7.3-pve1
spiceterm: 3.3.0
swtpm: 0.8.0+pve1
vncterm: 1.8.0
zfsutils-linux: 2.2.2-pve1

 

[longlegg]

Got it up and running now