Hi Guys,
We are trialing your software as we are looking to move away from Vmware for many reasons, mainly pricing and poor resource management.
Our trial server is a 1RU server with a 100mb/s network card and we have a USB gigabit network card used for the NAS and access to our internal services (NAS Backups and VPN )
I have tried every config imaginable to get the network to work. I have tried adding the IP in eth1 as well as creating a bridge and linking it to eth1 but the interface never comes up and responds to Ping.
I tried issues Hwinfo but its not a valid command on this version. I am not sure if its picking up the USB adapter. However when i issue
"cat /proc/net/dev" i am presented with the following:
root@static-10-16-101-69:~# cat /proc/net/dev
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 3585 22 0 0 0 0 0 0 3585 22 0 0 0 0 0 0
eth0: 2046068 7275 0 0 0 0 0 0 1427587 5032 0 0 0 0 0 0
eth1: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
wlan0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
vmbr0: 1463913 6109 0 0 0 0 0 89 1426111 5010 0 0 0 0 0 0
venet0: 0 0 0 0 0 0 0 0 0 0 0 3 0 0 0 0
root@static-10-16-101-69:~# root@static-10-16-101-69:~# cat /proc/net/dev
This clearly shows ETH1 and ETH0. Eth0 is currently set on the internal addresses and ETH1 is going to be the Public IP transit traffic for the time being but once we get this to work they will need to be swapped as ETH0 will need to be internal traffic as its gigabit and Public being 100mbit
Can you guys help us get this sorted. We like this software as we can use our NAS which we can not do in SolusVM which is the other contender
Any help would be great
Regards,
Matt
ANSA NOC
Aus Net Servers Australia Pty Ltd
http://www.ausnetservers.net.au
We are trialing your software as we are looking to move away from Vmware for many reasons, mainly pricing and poor resource management.
Our trial server is a 1RU server with a 100mb/s network card and we have a USB gigabit network card used for the NAS and access to our internal services (NAS Backups and VPN )
I have tried every config imaginable to get the network to work. I have tried adding the IP in eth1 as well as creating a bridge and linking it to eth1 but the interface never comes up and responds to Ping.
I tried issues Hwinfo but its not a valid command on this version. I am not sure if its picking up the USB adapter. However when i issue
"cat /proc/net/dev" i am presented with the following:
root@static-10-16-101-69:~# cat /proc/net/dev
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 3585 22 0 0 0 0 0 0 3585 22 0 0 0 0 0 0
eth0: 2046068 7275 0 0 0 0 0 0 1427587 5032 0 0 0 0 0 0
eth1: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
wlan0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
vmbr0: 1463913 6109 0 0 0 0 0 89 1426111 5010 0 0 0 0 0 0
venet0: 0 0 0 0 0 0 0 0 0 0 0 3 0 0 0 0
root@static-10-16-101-69:~# root@static-10-16-101-69:~# cat /proc/net/dev
This clearly shows ETH1 and ETH0. Eth0 is currently set on the internal addresses and ETH1 is going to be the Public IP transit traffic for the time being but once we get this to work they will need to be swapped as ETH0 will need to be internal traffic as its gigabit and Public being 100mbit
Can you guys help us get this sorted. We like this software as we can use our NAS which we can not do in SolusVM which is the other contender
Any help would be great
Regards,
Matt
ANSA NOC
Aus Net Servers Australia Pty Ltd
http://www.ausnetservers.net.au
