Hi - I just went to create a new VM on a proxmox server I installed several months ago, and was surprised that the .iso files I'd previously uploaded were not visible when trying to use an .iso image as a CD/DVD option.
I only use local storage, and no images are visible in the "Content" tab on local storage.
However from the command line, it looks as if the images are still there:
root@pm02:/var/lib/vz/template/iso# ls -al
total 1371972
drwxr-xr-x 2 root root 4096 Dec 11 09:01 .
drwxr-xr-x 5 root root 4096 Jun 11 2013 ..
-rw-rw-rw- 1 root root 715644928 Jun 12 14:25 ubuntu-10.04.1-server-amd64.iso
-rw-rw-rw- 1 root root 687865856 Jun 12 14:54 ubuntu-12.04.2-server-amd64.iso
I tried uploading an additional .iso, but it just times out. The VM I had previously installed on the PVE is working just fine, but am a bit perturbed that I am now unable to install others. Any pointers? Output from pveversion -v follows - thanks in advance
Mark
root@pm02:/var/lib/vz/template/iso# pveversion -v
pve-manager: 3.0-23 (pve-manager/3.0/957f0862)
running kernel: 2.6.32-22-pve
proxmox-ve-2.6.32: 3.0-107
pve-kernel-2.6.32-20-pve: 2.6.32-100
pve-kernel-2.6.32-22-pve: 2.6.32-107
lvm2: 2.02.98-pve4
clvm: 2.02.98-pve4
corosync-pve: 1.4.5-1
openais-pve: 1.1.4-3
libqb0: 0.11.1-2
redhat-cluster-pve: 3.2.0-2
resource-agents-pve: 3.9.2-4
fence-agents-pve: 4.0.0-2
pve-cluster: 3.0-8
qemu-server: 3.0-20
pve-firmware: 1.0-23
libpve-common-perl: 3.0-8
libpve-access-control: 3.0-7
libpve-storage-perl: 3.0-8
vncterm: 1.1-4
vzctl: 4.0-1pve4
vzprocps: 2.0.11-2
vzquota: 3.1-2
pve-qemu-kvm: 1.4-13
ksm-control-daemon: 1.1-1
I only use local storage, and no images are visible in the "Content" tab on local storage.
However from the command line, it looks as if the images are still there:
root@pm02:/var/lib/vz/template/iso# ls -al
total 1371972
drwxr-xr-x 2 root root 4096 Dec 11 09:01 .
drwxr-xr-x 5 root root 4096 Jun 11 2013 ..
-rw-rw-rw- 1 root root 715644928 Jun 12 14:25 ubuntu-10.04.1-server-amd64.iso
-rw-rw-rw- 1 root root 687865856 Jun 12 14:54 ubuntu-12.04.2-server-amd64.iso
I tried uploading an additional .iso, but it just times out. The VM I had previously installed on the PVE is working just fine, but am a bit perturbed that I am now unable to install others. Any pointers? Output from pveversion -v follows - thanks in advance
Mark
root@pm02:/var/lib/vz/template/iso# pveversion -v
pve-manager: 3.0-23 (pve-manager/3.0/957f0862)
running kernel: 2.6.32-22-pve
proxmox-ve-2.6.32: 3.0-107
pve-kernel-2.6.32-20-pve: 2.6.32-100
pve-kernel-2.6.32-22-pve: 2.6.32-107
lvm2: 2.02.98-pve4
clvm: 2.02.98-pve4
corosync-pve: 1.4.5-1
openais-pve: 1.1.4-3
libqb0: 0.11.1-2
redhat-cluster-pve: 3.2.0-2
resource-agents-pve: 3.9.2-4
fence-agents-pve: 4.0.0-2
pve-cluster: 3.0-8
qemu-server: 3.0-20
pve-firmware: 1.0-23
libpve-common-perl: 3.0-8
libpve-access-control: 3.0-7
libpve-storage-perl: 3.0-8
vncterm: 1.1-4
vzctl: 4.0-1pve4
vzprocps: 2.0.11-2
vzquota: 3.1-2
pve-qemu-kvm: 1.4-13
ksm-control-daemon: 1.1-1