messed up volume group

R

revmarkp

Active Member
Jan 5, 2020
8
0
41
57
Chelsmford, Essex, UK
somehome I've managed to partly delete a VG and now when I want to assign /dev/sdb to it via the datacentre, the gui doesn't list my vg 'storage2'. it shows in pvs, but not in lvs. Help to correct this appreciated for a newb.

root@pve-pb2:~# lvs LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert data pve twi-aotz-- <181.18g 34.92 2.56 root pve -wi-ao---- 69.50g swap pve -wi-ao---- 8.00g vm-211-disk-0 pve Vwi-aotz-- 3.00g data 82.63 vm-601-disk-0 pve Vwi-a-tz-- 8.00g data 11.05 vm-601-disk-1 pve Vwi-aotz-- 8.00g data 59.56 vm-602-disk-0 pve Vwi-a-tz-- 8.00g data 26.71 vm-603-disk-0 pve Vwi-a-tz-- 8.00g data 13.37 vm-801-disk-0 pve Vwi-a-tz-- 32.00g data 3.20 vm-802-disk-0 pve Vwi-a-tz-- 32.00g data 3.20 vm-803-disk-0 pve Vwi-a-tz-- 32.00g data 46.39 vm-804-disk-0 pve Vwi-aotz-- 320.00g data 6.41 vm-805-disk-0 pve Vwi-a-tz-- 8.00g data 12.33 vm-806-disk-0 pve Vwi-a-tz-- 320.00g data 4.23 root@pve-pb2:~# pvs PV VG Fmt Attr PSize PFree /dev/sda3 pve lvm2 a-- 278.37g 15.99g /dev/sdb storage2 lvm2 a-- 1.09t 1.09t root@pve-pb2:~# lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sda 8:0 0 278.9G 0 disk ├─sda1 8:1 0 1007K 0 part ├─sda2 8:2 0 512M 0 part └─sda3 8:3 0 278.4G 0 part ├─pve-swap 253:0 0 8G 0 lvm [SWAP] ├─pve-root 253:1 0 69.5G 0 lvm / ├─pve-data_tmeta 253:2 0 1.9G 0 lvm │ └─pve-data-tpool 253:4 0 181.2G 0 lvm │ ├─pve-data 253:5 0 181.2G 0 lvm │ ├─pve-vm--601--disk--0 253:6 0 8G 0 lvm │ ├─pve-vm--801--disk--0 253:7 0 32G 0 lvm │ ├─pve-vm--601--disk--1 253:8 0 8G 0 lvm │ ├─pve-vm--602--disk--0 253:9 0 8G 0 lvm │ ├─pve-vm--802--disk--0 253:10 0 32G 0 lvm │ ├─pve-vm--803--disk--0 253:11 0 32G 0 lvm │ ├─pve-vm--804--disk--0 253:12 0 320G 0 lvm │ ├─pve-vm--805--disk--0 253:13 0 8G 0 lvm │ ├─pve-vm--603--disk--0 253:14 0 8G 0 lvm │ ├─pve-vm--806--disk--0 253:15 0 320G 0 lvm │ └─pve-vm--211--disk--0 253:16 0 3G 0 lvm └─pve-data_tdata 253:3 0 181.2G 0 lvm └─pve-data-tpool 253:4 0 181.2G 0 lvm ├─pve-data 253:5 0 181.2G 0 lvm ├─pve-data 253:5 0 181.2G 0 lvm ├─pve-vm--601--disk--0 253:6 0 8G 0 lvm ├─pve-vm--801--disk--0 253:7 0 32G 0 lvm ├─pve-vm--601--disk--1 253:8 0 8G 0 lvm ├─pve-vm--602--disk--0 253:9 0 8G 0 lvm ├─pve-vm--802--disk--0 253:10 0 32G 0 lvm ├─pve-vm--803--disk--0 253:11 0 32G 0 lvm ├─pve-vm--804--disk--0 253:12 0 320G 0 lvm ├─pve-vm--805--disk--0 253:13 0 8G 0 lvm ├─pve-vm--603--disk--0 253:14 0 8G 0 lvm ├─pve-vm--806--disk--0 253:15 0 320G 0 lvm └─pve-vm--211--disk--0 253:16 0 3G 0 lvm sdb 8:16 0 1.1T 0 disk sdc 8:32 1 14.4G 0 disk ├─sdc1 8:33 1 238K 0 part ├─sdc2 8:34 1 2.8M 0 part ├─sdc3 8:35 1 772.8M 0 part └─sdc4 8:36 1 300K 0 part
 
root@pve-pb2:~# pvesm status
Name Type Status Total Used Available %
local dir active 72840448 2798392 70042056 3.84%
local-lvm lvmthin active 189976576 66339820 123636755 34.92%
nfspb1 nfs active 238798848 52859904 173739008 22.14%
storage lvmthin disabled 0 0 0 N/A
 
I've deleted the node and rebuilt it. When it was standalone, before I rejoined my cluster, the second drive /dev/sdb/ could be seen and accessed as storage by the node OK. When I joined the cluster the storage (LVM) doesn't show under that node anymore. Neither can I see it listed or available as a volume if I try to add it through Datacentre--> storage.
Can anyone tell me what I'm doing wrong here please? I've clearly done something different with this node compared to my (only) other one which has v similar hardware. Have a done something wrong with the format of this drive perhaps?
 
You must log in or register to reply here.
Top Bottom