LVM Thin Pool Status unknown / inactive

r3d007

Member
Jul 26, 2019
10
0
6
44
Hi there!

I tested some backup tools to backup the Proxmox server.
But after recovering the server I have a problem with the LVM Thin Pools.

In the WebGUI the LVM are shown with a small question mark.
Output of pvesm status
Code:
root@thread1:~# pvesm status
Name                    Type     Status           Total            Used       Available        %
Backup-SRV              cifs     active     36145496064     22707584844     13437911220   62.82%
Thread1-LVM-Thin     lvmthin   inactive               0               0               0    0.00%
local                    dir     active        60890972         2891456        54876728    4.75%
local-lvm            lvmthin   inactive               0               0               0    0.00%

Output of vgdisplay
Code:
root@thread1:~# vgdisplay
  --- Volume group ---
  VG Name               pve
  System ID             
  Format                lvm2
  Metadata Areas        1
  Metadata Sequence No  7
  VG Access             read/write
  VG Status             resizable
  MAX LV                0
  Cur LV                2
  Open LV               2
  Max PV                0
  Cur PV                1
  Act PV                1
  VG Size               237.97 GiB
  PE Size               4.00 MiB
  Total PE              60921
  Alloc PE / Size       17216 / 67.25 GiB
  Free  PE / Size       43705 / 170.72 GiB
  VG UUID               lMNLhw-ifz4-02s5-L1Qh-SgwA-271D-c2IaHi
  
  --- Volume group ---
  VG Name               Thread1-LVM-Thin
  System ID             
  Format                lvm2
  Metadata Areas        1
  Metadata Sequence No  7
  VG Access             read/write
  VG Status             resizable
  MAX LV                0
  Cur LV                2
  Open LV               0
  Max PV                0
  Cur PV                1
  Act PV                1
  VG Size               <1.82 TiB
  PE Size               4.00 MiB
  Total PE              476932
  Alloc PE / Size       23041 / 90.00 GiB
  Free  PE / Size       453891 / 1.73 TiB
  VG UUID               GcpxZE-tX9X-0Jiq-emLC-Ns9X-RvFl-BvfNNW

Installed VMs on this LVM can be started but when creating a new VM I am not able to select the LVM as storage.

Thanks in advance!
r3d007

If any other output is needed just say.
 

Attachments

  • LVM Status.PNG
    LVM Status.PNG
    20.6 KB · Views: 16
Hi,

can you send the output of "lvs "