Lost a few disks on joining cluster

[DaleHutch]

Greetings,

I recently upgraded from v8 to v9 on a two node cluster. Well one upgraded fine while the second one crashed. I was able to clear the node and reset the cluster and rebuild the crashed node. My rebuilt node has 4 disks. 1 is for Proxmox and the other 3 are for VMs, ISOs etc. I wiped them and added them back as directories to the node as datastore 1 , 2 and 3 with xfs. They all appear fine as usage storage.

Now, I created a new cluster and joined the rebuilt node. Everything went fine until I discovered datastore 1 and datastore 3 on the second node are not shown anymore. If I look at the disks on that node they are there but I can't seem to figure out why they are not displayed or usable. I figure I wipe them again and add them back after the cluster was built. I tried to wiping them thru the GUI but I get this error, "disk/partition '/dev/nvme0n1p1' is mounted (500)"

I can see the mounts when I use the CLI "/mnt/pve/datastore1" "/mnt/pve/datastore3"

How can I get these to appear now and be usable?

Thanks

 

[Impact]

Check Datacenter > Storage. You might have to re-add it there. If storages are different on each node you have to set to which nodes it should apply.

 

[DaleHutch]

AH! Yes.! Right you are! Thank You for jogging my memory.