[SOLVED] Log error - info

miranpiscanc

Member
Dec 6, 2024
41
9
8
Hello everyone,
I received a notification from Proxmox. I'm sharing it :


This message was generated by the smartd daemon running on:

host name: Proxmox
DNS domain: dom

The following warning/error was logged by the smartd daemon:

Device: /dev/sda [SAT], Failed SMART usage Attribute: 183 Unknown_Phison_Attr.

Device info:
KINGSTON SHSS37A120G, S/N:50026B72590D49BD, FW:SAFM00.r, 120 GB

For details see host's SYSLOG.

You can also use the smartctl utility for further investigation.
The original message about this issue was sent at Fri Jan 17 21:39:32 2025 CET
Another message will be sent in 24 hours if the problem persists.



along with the logs copied from the server, as instructed in the email.

Jan 22 22:05:48 Proxmox smartd[557]: Device: /dev/sda [SAT], Failed SMART usage Attribute: 183 Unknown_Phison_Attr.
Jan 22 22:05:48 Proxmox smartd[557]: Sending warning via /usr/share/smartmontools/smartd-runner to root ...
Jan 22 22:05:48 Proxmox smartd[557]: Warning via /usr/share/smartmontools/smartd-runner to root: successful
Jan 22 22:05:48 Proxmox smartd[557]: Device: /dev/sda [SAT], SMART Prefailure Attribute: 194 Temperature_Celsius changed from 66 to 65
Jan 22 22:05:48 Proxmox postfix/pickup[669420]: E07D580735: uid=0 from=<root>
Jan 22 22:05:48 Proxmox postfix/cleanup[673107]: E07D580735: message-id=<20250122210548.E07D580735@Proxmox.dom>
Jan 22 22:05:48 Proxmox postfix/qmgr[858]: E07D580735: from=<root@Proxmox.dom>, size=993, nrcpt=1 (queue active)
Jan 22 22:05:49 Proxmox proxmox-mail-forward[673111]: notified via target `Notifiche_da_Proxmox`
Jan 22 22:05:49 Proxmox postfix/local[673110]: E07D580735: to=<root@Proxmox.dom>, orig_to=<root>, relay=local, delay=0.49, delays=0.04/0.01/0/0.44, dsn=2.0.0, status=sent (delivered to command: /usr/bin/proxmox-mail-forward)

Jan 22 22:05:49 Proxmox postfix/qmgr[858]: E07D580735: removed





However, I honestly don't understand if I should be concerned. If I interpret it correctly, is there an issue with the disk temperature?
Thank you.
 
Maybe ask the manufacturer of the drive? Looks like smartd does not (yet) know your drive and what each SMART attribute is for. This is not Proxmox specific and there are guides on the internet about configuring smartd (to ignore an attribute or drive) and how to troubleshoot these kinds of things.
 

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get yours easily in our online shop.

Buy now!