local-lvm PLÖTZLICH voll

B

Bartimaus

New Member
Sep 7, 2023
19
0
1
Moin,

ich brauche mal Eure Hilfe auf der Suche nach einem Speicherfresser in meinem Proxmox "local-lvm".
Gestern Mittag ist die Platzbelegung sprunghaft angestiegen, und ich weiss nicht wieso. Es wurden keine Container, VMs on der sonstiges angelegt.
Hier ist die Ausgabe von lvs:
Code: 
root@pve:~# lvs
  LV            VG  Attr       LSize   Pool Origin Data%  Meta%  Move Log Cpy%Sync Convert
  cache         pve Vwi-aotz-- 418.51g data        65.82                                
  data          pve twi-aotz-- 400.00g             93.90  3.53                          
  root          pve -wi-ao----  96.00g                                                  
  swap          pve -wi-ao----   8.00g                                                  
  vm-100-disk-0 pve Vwi-aotz--   2.00g data        50.85                                
  vm-102-disk-0 pve Vwi-aotz--   2.00g data        54.97                                
  vm-103-disk-0 pve Vwi-aotz--   2.00g data        65.17                                
  vm-107-disk-0 pve Vwi-aotz--   8.00g data        36.76                                
  vm-108-disk-0 pve Vwi-aotz--  10.00g data        67.83                                
  vm-109-disk-0 pve Vwi-aotz--   4.00g data        52.44                                
  vm-110-disk-0 pve Vwi-aotz--   9.00g data        98.34                                
  vm-112-disk-0 pve Vwi-aotz-- 820.00m data        56.71                                
  vm-115-disk-0 pve Vwi-aotz--  11.00g data        97.75                                
  vm-116-disk-0 pve Vwi-aotz--   8.00g data        20.18                                
  vm-119-disk-0 pve Vwi-aotz--   2.00g data        87.01                                
  vm-201-disk-0 pve Vwi-a-tz--   4.00m data        14.06                                
  vm-201-disk-1 pve Vwi-a-tz--  16.00g data        28.90                                
  vm-300-disk-0 pve Vwi-a-tz--  32.00g data        0.00                                  
  vm-301-disk-0 pve Vwi-aotz--   4.00m data        14.06                                
  vm-301-disk-1 pve Vwi-aotz--  80.00g data        22.67                                
  vm-301-disk-2 pve Vwi-aotz--   4.00m data        1.56                                  
  vm-400-disk-0 pve Vwi-a-tz--   4.00m data        14.06                                
  vm-400-disk-1 pve Vwi-a-tz-- 128.00g data        30.27                                
  vm-400-disk-2 pve Vwi-a-tz--   4.00m data        1.56                                  
root@pve:~#

Die Summe der belegten Speicher für LXC/VM belegt in Summe um die 338GB,.

Hier ein Screen vom plötzlichen Speicheranstieg gestern mittag:

1747562357005.png

Wieso werden 406GB als belegt angezeigt anstelle der errechneten 338GB ?
Welchen Input braucht Ihr noch ?

Hier noch ein Auszug aus dem Syslog von gestern:

Code: 
May 17 09:15:01 pve CRON[3265811]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
May 17 09:15:03 pve CRON[3265811]: pam_unix(cron:session): session closed for user root
May 17 09:17:01 pve CRON[3267226]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
May 17 09:17:01 pve CRON[3267227]: (root) CMD (cd / && run-parts --report /etc/cron.hourly)
May 17 09:17:01 pve CRON[3267226]: pam_unix(cron:session): session closed for user root
May 17 10:05:01 pve CRON[3294967]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
May 17 10:05:01 pve CRON[3294968]: (root) CMD (/usr/bin/bash /usr/local/bin/loeschen.sh >> /var/log/cron/loeschen.log 2>&1)
May 17 10:05:06 pve CRON[3294967]: pam_unix(cron:session): session closed for user root
May 17 10:13:35 pve smartd[1062]: Device: /dev/sda [SAT], SMART Usage Attribute: 190 Airflow_Temperature_Cel changed from 69 to 68
May 17 10:17:01 pve CRON[3302269]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
May 17 10:17:01 pve CRON[3302270]: (root) CMD (cd / && run-parts --report /etc/cron.hourly)
May 17 10:17:01 pve CRON[3302269]: pam_unix(cron:session): session closed for user root
May 17 10:43:35 pve smartd[1062]: Device: /dev/sda [SAT], SMART Usage Attribute: 190 Airflow_Temperature_Cel changed from 68 to 59
May 17 11:00:52 pve systemd[1]: Starting man-db.service - Daily man-db regeneration...
May 17 11:00:52 pve systemd[1]: man-db.service: Deactivated successfully.
May 17 11:00:52 pve systemd[1]: Finished man-db.service - Daily man-db regeneration.
May 17 11:13:35 pve smartd[1062]: Device: /dev/sda [SAT], SMART Usage Attribute: 190 Airflow_Temperature_Cel changed from 59 to 66
May 17 11:17:01 pve CRON[3337626]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
May 17 11:17:01 pve CRON[3337627]: (root) CMD (cd / && run-parts --report /etc/cron.hourly)
May 17 11:17:01 pve CRON[3337626]: pam_unix(cron:session): session closed for user root
May 17 11:43:35 pve smartd[1062]: Device: /dev/sda [SAT], SMART Usage Attribute: 190 Airflow_Temperature_Cel changed from 66 to 68
May 17 12:01:52 pve systemd[1]: Starting apt-daily.service - Daily apt download activities...
May 17 12:01:52 pve systemd[1]: apt-daily.service: Deactivated successfully.
May 17 12:01:52 pve systemd[1]: Finished apt-daily.service - Daily apt download activities.
May 17 12:17:01 pve CRON[3372693]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
May 17 12:17:01 pve CRON[3372694]: (root) CMD (cd / && run-parts --report /etc/cron.hourly)
May 17 12:17:01 pve CRON[3372693]: pam_unix(cron:session): session closed for user root
May 17 13:17:01 pve CRON[3407756]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
May 17 13:17:01 pve CRON[3407757]: (root) CMD (cd / && run-parts --report /etc/cron.hourly)
May 17 13:17:01 pve CRON[3407756]: pam_unix(cron:session): session closed for user root
May 17 14:13:35 pve smartd[1062]: Device: /dev/sda [SAT], SMART Usage Attribute: 190 Airflow_Temperature_Cel changed from 68 to 64
May 17 14:17:01 pve CRON[3442711]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
May 17 14:17:01 pve CRON[3442713]: (root) CMD (cd / && run-parts --report /etc/cron.hourly)
May 17 14:17:01 pve CRON[3442711]: pam_unix(cron:session): session closed for user root
May 17 14:38:31 pve dmeventd[594]: WARNING: Thin pool pve-data-tpool data is now 80.10% full.
May 17 14:41:32 pve pvedaemon[2370509]: <root@pam> successful auth for user 'root@pam'
May 17 14:43:33 pve pvedaemon[2370318]: worker exit
May 17 14:43:33 pve pvedaemon[1541]: worker 2370318 finished
May 17 14:43:33 pve pvedaemon[1541]: starting 1 worker(s)
May 17 14:43:33 pve pvedaemon[1541]: worker 3458865 started
May 17 14:43:35 pve smartd[1062]: Device: /dev/sda [SAT], SMART Usage Attribute: 190 Airflow_Temperature_Cel changed from 64 to 63
May 17 14:44:17 pve pvedaemon[2370509]: worker exit
May 17 14:44:17 pve pvedaemon[1541]: worker 2370509 finished
May 17 14:44:17 pve pvedaemon[1541]: starting 1 worker(s)
May 17 14:44:17 pve pvedaemon[1541]: worker 3459453 started
May 17 14:44:48 pve pvedaemon[3459906]: starting lxc termproxy UPID:pve:0034CB42:0497A964:682884C0:vncproxy:100:root@pam:
May 17 14:44:48 pve pvedaemon[2389108]: <root@pam> starting task UPID:pve:0034CB42:0497A964:682884C0:vncproxy:100:root@pam:
May 17 14:44:48 pve pvedaemon[3459453]: <root@pam> successful auth for user 'root@pam'
May 17 14:44:56 pve pvedaemon[2389108]: <root@pam> end task UPID:pve:0034CB42:0497A964:682884C0:vncproxy:100:root@pam: OK
May 17 14:44:56 pve pvedaemon[3460000]: starting lxc termproxy UPID:pve:0034CBA0:0497AC80:682884C8:vncproxy:102:root@pam:
May 17 14:44:56 pve pvedaemon[2389108]: <root@pam> starting task UPID:pve:0034CBA0:0497AC80:682884C8:vncproxy:102:root@pam:
May 17 14:44:56 pve pvedaemon[3459453]: <root@pam> successful auth for user 'root@pam'
May 17 14:45:00 pve pvedaemon[2389108]: <root@pam> end task UPID:pve:0034CBA0:0497AC80:682884C8:vncproxy:102:root@pam: OK
May 17 14:45:00 pve pvedaemon[3460036]: starting lxc termproxy UPID:pve:0034CBC4:0497AE05:682884CC:vncproxy:103:root@pam:
May 17 14:45:00 pve pvedaemon[2389108]: <root@pam> starting task UPID:pve:0034CBC4:0497AE05:682884CC:vncproxy:103:root@pam:
May 17 14:45:00 pve pvedaemon[3458865]: <root@pam> successful auth for user 'root@pam'
May 17 14:45:06 pve pvedaemon[2389108]: <root@pam> end task UPID:pve:0034CBC4:0497AE05:682884CC:vncproxy:103:root@pam: OK
May 17 14:45:06 pve pvedaemon[3460117]: starting lxc termproxy UPID:pve:0034CC15:0497B078:682884D2:vncproxy:107:root@pam:
May 17 14:45:06 pve pvedaemon[3458865]: <root@pam> starting task UPID:pve:0034CC15:0497B078:682884D2:vncproxy:107:root@pam:
May 17 14:45:06 pve pvedaemon[3459453]: <root@pam> successful auth for user 'root@pam'
May 17 14:45:23 pve pvedaemon[3458865]: <root@pam> end task UPID:pve:0034CC15:0497B078:682884D2:vncproxy:107:root@pam: OK
May 17 14:47:31 pve dmeventd[594]: WARNING: Thin pool pve-data-tpool data is now 85.40% full.
May 17 14:55:50 pve pvestatd[1520]: auth key pair too old, rotating..
May 17 15:13:35 pve smartd[1062]: Device: /dev/sda [SAT], SMART Usage Attribute: 190 Airflow_Temperature_Cel changed from 63 to 6


LG
 
Last edited:
Hi, eventuell hat eine VM angefangen viel zu schreiben. Irgendwo eventuell auch noch einen Snapshot vergessen?
 
Hi, nein, die VMs sind alle deaktiviert und werden nur temporär hochgefahren. Aktiv sind nur LXCs. Auch da nix unauffälliges, LOCAL-LVM ist auch nicht als BackupDevice aktiv
 
Ich habe vor 2 Wochen erfolgreich "LOCAL-LVM" verkleinert, und den freigewordenen Speicherplatz andersweitig genutzt. Das läuft auch ohne Probleme

B

Post in thread 'Reduce size of local-lvm'

fiona said:
Please also check that the backups work before proceeding to re-create the thin pool! What you can do is:
Code: 
lvremove pve/data
lvcreate -L<pool size>G -ndata pve
lvconvert --type thin-pool --poolmetadatasize <metadata size>G pve/data
PVE normally uses 1% of the pool size for the metadatasize, but at least 1G.
Click to expand...
Thank you, still works with V 8.4.1
Shrinked my LOCAL-LVM from 1.000GB to 400GB, and still 70% unused....
 
Last edited:
You must log in or register to reply here.
Top Bottom