Kernel 3.10 Dlink DFE-580TX (sundance kernel module) no more working

[mmenaz]

Hi, I've an "headless" (no video card) proxmox server 3.3 version, with kernel 2.6.32-34-pve the dlink 4 port nic adapter works fine, if I install 3.10 kernel seems is not recognized (dmesg | grep eth does not show the related ports).
Any idea / tip / hope to have it supported? With lspci -k under kernel 2.6.32-34-pve I have

...
06:04.0 Ethernet controller: D-Link System Inc DL10050 Sundance Ethernet (rev 15)
        Subsystem: D-Link System Inc DFE-580TX
        Kernel driver in use: sundance
06:05.0 Ethernet controller: D-Link System Inc DL10050 Sundance Ethernet (rev 15)
        Subsystem: D-Link System Inc DFE-580TX
        Kernel driver in use: sundance
06:06.0 Ethernet controller: D-Link System Inc DL10050 Sundance Ethernet (rev 15)
        Subsystem: D-Link System Inc DFE-580TX
        Kernel driver in use: sundance
06:07.0 Ethernet controller: D-Link System Inc DL10050 Sundance Ethernet (rev 15)
        Subsystem: D-Link System Inc DFE-580TX
        Kernel driver in use: sundance

My proxmox release is:

proxmox-ve-2.6.32: 3.3-139 (running kernel: 2.6.32-34-pve)
pve-manager: 3.3-5 (running version: 3.3-5/bfebec03)
pve-kernel-2.6.32-32-pve: 2.6.32-136
pve-kernel-3.10.0-5-pve: 3.10.0-19
pve-kernel-2.6.32-33-pve: 2.6.32-138
pve-kernel-2.6.32-30-pve: 2.6.32-130
pve-kernel-2.6.32-34-pve: 2.6.32-139
lvm2: 2.02.98-pve4
clvm: 2.02.98-pve4
corosync-pve: 1.4.7-1
openais-pve: 1.1.4-3
libqb0: 0.11.1-2
redhat-cluster-pve: 3.2.0-2
resource-agents-pve: 3.9.2-4
fence-agents-pve: 4.0.10-1
pve-cluster: 3.0-15
qemu-server: 3.3-3
pve-firmware: 1.1-3
libpve-common-perl: 3.0-19
libpve-access-control: 3.0-15
libpve-storage-perl: 3.0-25
pve-libspice-server1: 0.12.4-3
vncterm: 1.1-8
vzctl: 4.0-1pve6
vzprocps: 2.0.11-2
vzquota: 3.1-2
pve-qemu-kvm: 2.1-10
ksm-control-daemon: 1.1-1
glusterfs-client: 3.5.2-1

Thanks a lot