Everytime my I restart my router eno1 seems to die, but after restarting proxmox, everything goes back to normal.
It also happens when I resocket the cable into eno1, it seems like the link goes down but always fails to go back up again...
after checking here's what I found.
Seems like eno2,enp3s0 are ok but eno1 is getting a Hardware Error after I unplug the NIC Link.
Which is kind of weird, knowing that it works every time I restart proxmox.
Here's how it looks after I restart proxmox
It also happens when I resocket the cable into eno1, it seems like the link goes down but always fails to go back up again...
after checking here's what I found.
Code:
root@homeserver:~# dmesg | grep eno2
[ 1.682631] igb 0000:01:00.0 eno2: renamed from eth0
[ 22.988255] vmbr0: port 1(eno2) entered blocking state
[ 22.988259] vmbr0: port 1(eno2) entered disabled state
[ 22.988268] igb 0000:01:00.0 eno2: entered allmulticast mode
[ 22.988305] igb 0000:01:00.0 eno2: entered promiscuous mode
[ 25.727151] igb 0000:01:00.0 eno2: igb: eno2 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
[ 25.727376] vmbr0: port 1(eno2) entered blocking state
[ 25.727379] vmbr0: port 1(eno2) entered forwarding state
root@homeserver:~# dmesg | grep enp3s0
[ 1.700700] igb 0000:03:00.0 enp3s0: renamed from eth1
[ 23.076883] vmbr1: port 1(enp3s0) entered blocking state
[ 23.076888] vmbr1: port 1(enp3s0) entered disabled state
[ 23.076896] igb 0000:03:00.0 enp3s0: entered allmulticast mode
[ 25.936101] igb 0000:03:00.0 enp3s0: igb: enp3s0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
[ 25.936328] vmbr1: port 1(enp3s0) entered blocking state
[ 25.936330] vmbr1: port 1(enp3s0) entered forwarding state
[ 43.356430] igb 0000:03:00.0 enp3s0: entered promiscuous mode
root@homeserver:~# dmesg | grep eno1
[ 1.667619] e1000e 0000:00:1f.6 eno1: renamed from eth2
[ 15.042117] e1000e 0000:00:1f.6 eno1: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 23.196873] vmbr2: port 1(eno1) entered blocking state
[ 23.196877] vmbr2: port 1(eno1) entered disabled state
[ 23.196892] e1000e 0000:00:1f.6 eno1: entered allmulticast mode
[ 23.196973] e1000e 0000:00:1f.6 eno1: entered promiscuous mode
[ 23.200864] vmbr2: port 1(eno1) entered blocking state
[ 23.200870] vmbr2: port 1(eno1) entered forwarding state
[ 329.588814] e1000e 0000:00:1f.6 eno1: NIC Link is Down
[ 329.588852] vmbr2: port 1(eno1) entered disabled state
[ 435.670139] e1000e 0000:00:1f.6 eno1: Hardware Error
[ 435.830601] e1000e 0000:00:1f.6 eno1: NIC Link is Down
[ 435.830667] vmbr2: port 1(eno1) entered disabled state
[ 440.192092] e1000e 0000:00:1f.6 eno1: Hardware Error
[ 475.439386] e1000e 0000:00:1f.6 eno1: Hardware Error
[ 475.599528] e1000e 0000:00:1f.6 eno1: NIC Link is Down
[ 475.599582] vmbr2: port 1(eno1) entered disabled state
[ 479.757262] e1000e 0000:00:1f.6 eno1: Hardware Error
Seems like eno2,enp3s0 are ok but eno1 is getting a Hardware Error after I unplug the NIC Link.
Which is kind of weird, knowing that it works every time I restart proxmox.
Here's how it looks after I restart proxmox
Code:
root@homeserver:~# dmesg | grep eno1
[ 1.712634] e1000e 0000:00:1f.6 eno1: renamed from eth2
[ 14.752149] e1000e 0000:00:1f.6 eno1: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 24.449676] vmbr2: port 1(eno1) entered blocking state
[ 24.449681] vmbr2: port 1(eno1) entered disabled state
[ 24.449694] e1000e 0000:00:1f.6 eno1: entered allmulticast mode
[ 24.449775] e1000e 0000:00:1f.6 eno1: entered promiscuous mode
[ 24.453277] vmbr2: port 1(eno1) entered blocking state
[ 24.453281] vmbr2: port 1(eno1) entered forwarding state
root@homeserver:~# dmesg | grep eno2
[ 1.670611] igb 0000:01:00.0 eno2: renamed from eth0
[ 24.240487] vmbr0: port 1(eno2) entered blocking state
[ 24.240492] vmbr0: port 1(eno2) entered disabled state
[ 24.240502] igb 0000:01:00.0 eno2: entered allmulticast mode
[ 24.240541] igb 0000:01:00.0 eno2: entered promiscuous mode
[ 26.997167] igb 0000:01:00.0 eno2: igb: eno2 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
[ 26.997392] vmbr0: port 1(eno2) entered blocking state
[ 26.997399] vmbr0: port 1(eno2) entered forwarding state
root@homeserver:~# dmesg | grep enp3s0
[ 1.721714] igb 0000:03:00.0 enp3s0: renamed from eth1
[ 24.327851] vmbr1: port 1(enp3s0) entered blocking state
[ 24.327856] vmbr1: port 1(enp3s0) entered disabled state
[ 24.327870] igb 0000:03:00.0 enp3s0: entered allmulticast mode
[ 27.152074] igb 0000:03:00.0 enp3s0: igb: enp3s0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
[ 27.152294] vmbr1: port 1(enp3s0) entered blocking state
[ 27.152296] vmbr1: port 1(enp3s0) entered forwarding state
[ 44.533427] igb 0000:03:00.0 enp3s0: entered promiscuous mode
Last edited: