Hello
I'm new to proxmox and I'm installing Proxmox (proxmox-ve: 8.3.0 (running kernel: 6.8.12-4-pve)) on a HP DL360 Gen11 with 10/25Gb 2-port SFP28 BCM57414 OCP3 Adapter
To my understanding I can use both ports on the adapter at 25 Gbs but when I check with ethtool I get this result
root@bbnl-pm01:~# ethtool ens14f0np0
Settings for ens14f0np0:
Supported ports: [ FIBRE ]
Supported link modes: 25000baseSR/Full
10000baseSR/Full
Supported pause frame use: Symmetric Receive-only
Supports auto-negotiation: Yes
Supported FEC modes: RS BASER
Advertised link modes: Not reported
Advertised pause frame use: No
Advertised auto-negotiation: No
Advertised FEC modes: Not reported
Speed: 10000Mb/s
Lanes: 1
Duplex: Full
Auto-negotiation: off
Port: FIBRE
PHYAD: 1
Transceiver: internal
Supports Wake-on: g
Wake-on: g
Current message level: 0x00002081 (8321)
drv tx_err hw
Link detected: yes
root@bbnl-pm01:~# ethtool ens14f1np1
Settings for ens14f1np1:
Supported ports: [ FIBRE ]
Supported link modes: 1000baseT/Full
10000baseT/Full
1000baseKX/Full
10000baseKX4/Full
10000baseKR/Full
1000baseX/Full
10000baseCR/Full
10000baseSR/Full
10000baseLR/Full
Supported pause frame use: Symmetric Receive-only
Supports auto-negotiation: Yes
Supported FEC modes: RS BASER
Advertised link modes: Not reported
Advertised pause frame use: No
Advertised auto-negotiation: No
Advertised FEC modes: Not reported
Speed: 10000Mb/s
Duplex: Full
Auto-negotiation: off
Port: FIBRE
PHYAD: 1
Transceiver: internal
Supports Wake-on: g
Wake-on: g
Current message level: 0x00002081 (8321)
drv tx_err hw
Link detected: no
So it looks like the second port only supports 1 and 10 Gbps but I can't find any conformation for it.
I want to connect the second port to a 25 GBs port on our Unify Aggregation switch. The first port is connected to a 10 Gbs port on that switch but will move to a 25 GBs port also.
For now I could do some reconfiguration and switch the cables on the ports, but I like to know if it is possible to use both ports on 25 Gbs
Any help is appreciated.
Regards
Herman de Jong
I'm new to proxmox and I'm installing Proxmox (proxmox-ve: 8.3.0 (running kernel: 6.8.12-4-pve)) on a HP DL360 Gen11 with 10/25Gb 2-port SFP28 BCM57414 OCP3 Adapter
To my understanding I can use both ports on the adapter at 25 Gbs but when I check with ethtool I get this result
root@bbnl-pm01:~# ethtool ens14f0np0
Settings for ens14f0np0:
Supported ports: [ FIBRE ]
Supported link modes: 25000baseSR/Full
10000baseSR/Full
Supported pause frame use: Symmetric Receive-only
Supports auto-negotiation: Yes
Supported FEC modes: RS BASER
Advertised link modes: Not reported
Advertised pause frame use: No
Advertised auto-negotiation: No
Advertised FEC modes: Not reported
Speed: 10000Mb/s
Lanes: 1
Duplex: Full
Auto-negotiation: off
Port: FIBRE
PHYAD: 1
Transceiver: internal
Supports Wake-on: g
Wake-on: g
Current message level: 0x00002081 (8321)
drv tx_err hw
Link detected: yes
root@bbnl-pm01:~# ethtool ens14f1np1
Settings for ens14f1np1:
Supported ports: [ FIBRE ]
Supported link modes: 1000baseT/Full
10000baseT/Full
1000baseKX/Full
10000baseKX4/Full
10000baseKR/Full
1000baseX/Full
10000baseCR/Full
10000baseSR/Full
10000baseLR/Full
Supported pause frame use: Symmetric Receive-only
Supports auto-negotiation: Yes
Supported FEC modes: RS BASER
Advertised link modes: Not reported
Advertised pause frame use: No
Advertised auto-negotiation: No
Advertised FEC modes: Not reported
Speed: 10000Mb/s
Duplex: Full
Auto-negotiation: off
Port: FIBRE
PHYAD: 1
Transceiver: internal
Supports Wake-on: g
Wake-on: g
Current message level: 0x00002081 (8321)
drv tx_err hw
Link detected: no
So it looks like the second port only supports 1 and 10 Gbps but I can't find any conformation for it.
I want to connect the second port to a 25 GBs port on our Unify Aggregation switch. The first port is connected to a 10 Gbs port on that switch but will move to a 25 GBs port also.
For now I could do some reconfiguration and switch the cables on the ports, but I like to know if it is possible to use both ports on 25 Gbs
Any help is appreciated.
Regards
Herman de Jong