Hi there
I have had windows installed on synology iscsi (directly) without using a lvm.
But now I can't restore the backup.
I'm getting follwing error:
My workaround was:
* Create new iscsi and combine with lvm
* Restore on iscsi_lvm
But I would like to be able to set use the lun directly or is there any issue why I shouldn't do that?
Error from backup:
TASK ERROR: command 'set -o pipefail && vma extract -v -r /var/tmp/vzdumptmp261676.fifo /mnt/pve/nas10G/dump/vzdump-qemu-402-2024_06_12-11_01_19.vma /var/tmp/vzdumptmp261676' failed: can't allocate space in iscsi storage
"
But: 2 TB Disk / 1,8TB free
synlogy status Connected, all fine...
Proxmox /dev/sdx is mounted
mount as ntfs works as well
I have had windows installed on synology iscsi (directly) without using a lvm.
But now I can't restore the backup.
I'm getting follwing error:
Code:
restore vma archive: vma extract -v -r /var/tmp/vzdumptmp261676.fifo /mnt/pve/nas10G/dump/vzdump-qemu-402-2024_06_12-11_01_19.vma /var/tmp/vzdumptmp261676
CFG: size: 851 name: qemu-server.conf
DEV: dev_id=1 size: 540672 devname: drive-efidisk0
DEV: dev_id=2 size: 17408 devname: drive-tpmstate0-backup
DEV: dev_id=3 size: 2254857830400 devname: drive-virtio0
CTIME: Wed Jun 12 11:01:30 2024
Formatting '/mnt/pve/nas10G/images/402/vm-402-disk-0.qcow2', fmt=qcow2 cluster_size=65536 extended_l2=off preallocation=metadata compression_type=zlib size=540672 lazy_refcounts=off refcount_bits=16
new volume ID is 'nas10G:402/vm-402-disk-0.qcow2'
Formatting '/mnt/pve/nas10G/images/402/vm-402-disk-0.raw', fmt=raw size=17408 preallocation=off
new volume ID is 'nas10G:402/vm-402-disk-0.raw'
temporary volume 'nas10G:402/vm-402-disk-0.qcow2' sucessfuly removed
temporary volume 'nas10G:402/vm-402-disk-0.raw' sucessfuly removed
no lock found trying to remove 'create' lock
error before or during data restore, some or all disks were not completely restored. VM 402 state is NOT cleaned up.
TASK ERROR: command 'set -o pipefail && vma extract -v -r /var/tmp/vzdumptmp261676.fifo /mnt/pve/nas10G/dump/vzdump-qemu-402-2024_06_12-11_01_19.vma /var/tmp/vzdumptmp261676' failed: can't allocate space in iscsi storageMy workaround was:
* Create new iscsi and combine with lvm
* Restore on iscsi_lvm
But I would like to be able to set use the lun directly or is there any issue why I shouldn't do that?
Error from backup:
TASK ERROR: command 'set -o pipefail && vma extract -v -r /var/tmp/vzdumptmp261676.fifo /mnt/pve/nas10G/dump/vzdump-qemu-402-2024_06_12-11_01_19.vma /var/tmp/vzdumptmp261676' failed: can't allocate space in iscsi storage
"
But: 2 TB Disk / 1,8TB free
synlogy status Connected, all fine...
Proxmox /dev/sdx is mounted
mount as ntfs works as well
Last edited: