Hi
We had upgraded from PVE 6.4 to PVE 7.4
We face lots of iscsi issues after upgrading to PVE7.4
PVE 6.4 setup
PVE – windows server 2019 file server
It has iscsi mounted drives used for file sharing to users
NO AD, no domain and only workgroup
Network card used E1000
All iscsi drives were working ok
It has been upgraded to pve7.4
Lots of ISCSI problems and frequent disconnect, corruption in iscsi mounted drives
Changed E1000 to virtio and installed virtio drivers inside windows 2019,
This change reduced some extent, but still lots of ISCSI issues found
Event ids 4227 – Tcpip failed to establish
Event id 130 – The file structure on the volume has been repaired
Event id 98 – volume needs to be taken offline
Event id 55 – a corruption was discovered in the file system structure
Event id 113 – iscsi discovery via send targets failed with error code 0x00002af9
Some time disk que increases more than 1 for some of the iscsi mounted drives
Any suggestions to clear iscsi issues in PVE 7.4
Thanks in advance
We had upgraded from PVE 6.4 to PVE 7.4
We face lots of iscsi issues after upgrading to PVE7.4
PVE 6.4 setup
PVE – windows server 2019 file server
It has iscsi mounted drives used for file sharing to users
NO AD, no domain and only workgroup
Network card used E1000
All iscsi drives were working ok
It has been upgraded to pve7.4
Lots of ISCSI problems and frequent disconnect, corruption in iscsi mounted drives
Changed E1000 to virtio and installed virtio drivers inside windows 2019,
This change reduced some extent, but still lots of ISCSI issues found
Event ids 4227 – Tcpip failed to establish
Event id 130 – The file structure on the volume has been repaired
Event id 98 – volume needs to be taken offline
Event id 55 – a corruption was discovered in the file system structure
Event id 113 – iscsi discovery via send targets failed with error code 0x00002af9
Some time disk que increases more than 1 for some of the iscsi mounted drives
Any suggestions to clear iscsi issues in PVE 7.4
Thanks in advance