I have a 3 node cluster using iscsi to a CentOS7 target. All has been well and dandy for quite some time until I updated 1 of the 3 nodes to the latest this morning.
After the update of the host, max_sectors_kb has changed from 4096 to 32767 for the disks presented from the CentOS7 target. This is causing all kinds of issues with my iscsi CentOS7 target.
What I don't understand is what is making the change. If I go back to the older kernel it stays at "32767". Nothing has changed on the target since it was setup almost 6 months ago.
Below are the packages before the update.
root@ccscloud1:~# pveversion -v
proxmox-ve: 4.1-39 (running kernel: 4.2.8-1-pve)
pve-manager: 4.1-22 (running version: 4.1-22/aca130cf)
pve-kernel-4.2.6-1-pve: 4.2.6-36
pve-kernel-4.2.8-1-pve: 4.2.8-39
pve-kernel-4.2.2-1-pve: 4.2.2-16
lvm2: 2.02.116-pve2
corosync-pve: 2.3.5-2
libqb0: 1.0-1
pve-cluster: 4.0-36
qemu-server: 4.0-64
pve-firmware: 1.1-7
libpve-common-perl: 4.0-54
libpve-access-control: 4.0-13
libpve-storage-perl: 4.0-45
pve-libspice-server1: 0.12.5-2
vncterm: 1.2-1
pve-qemu-kvm: 2.5-9
pve-container: 1.0-52
pve-firewall: 2.0-22
pve-ha-manager: 1.0-25
ksm-control-daemon: 1.2-1
glusterfs-client: 3.5.2-2+deb8u1
lxc-pve: 1.1.5-7
lxcfs: 2.0.0-pve2
cgmanager: 0.39-pve1
criu: 1.6.0-1
zfsutils: 0.6.5-pve7~jessie
Below are the packages after the update
root@ccscloud2:~# pveversion -v
proxmox-ve: 4.2-58 (running kernel: 4.4.13-2-pve)
pve-manager: 4.2-17 (running version: 4.2-17/e1400248)
pve-kernel-4.2.6-1-pve: 4.2.6-36
pve-kernel-4.4.13-2-pve: 4.4.13-58
pve-kernel-4.2.8-1-pve: 4.2.8-41
pve-kernel-4.2.2-1-pve: 4.2.2-16
lvm2: 2.02.116-pve2
corosync-pve: 2.3.5-2
libqb0: 1.0-1
pve-cluster: 4.0-43
qemu-server: 4.0-85
pve-firmware: 1.1-8
libpve-common-perl: 4.0-72
libpve-access-control: 4.0-18
libpve-storage-perl: 4.0-56
pve-libspice-server1: 0.12.8-1
vncterm: 1.2-1
pve-qemu-kvm: 2.6-1
pve-container: 1.0-71
pve-firewall: 2.0-29
pve-ha-manager: 1.0-32
ksm-control-daemon: 1.2-1
glusterfs-client: 3.5.2-2+deb8u2
lxc-pve: 1.1.5-7
lxcfs: 2.0.0-pve2
cgmanager: 0.39-pve1
criu: 1.6.0-1
zfsutils: 0.6.5.7-pve10~bpo80
Does anyone know what sets this parameter?
After the update of the host, max_sectors_kb has changed from 4096 to 32767 for the disks presented from the CentOS7 target. This is causing all kinds of issues with my iscsi CentOS7 target.
What I don't understand is what is making the change. If I go back to the older kernel it stays at "32767". Nothing has changed on the target since it was setup almost 6 months ago.
Below are the packages before the update.
root@ccscloud1:~# pveversion -v
proxmox-ve: 4.1-39 (running kernel: 4.2.8-1-pve)
pve-manager: 4.1-22 (running version: 4.1-22/aca130cf)
pve-kernel-4.2.6-1-pve: 4.2.6-36
pve-kernel-4.2.8-1-pve: 4.2.8-39
pve-kernel-4.2.2-1-pve: 4.2.2-16
lvm2: 2.02.116-pve2
corosync-pve: 2.3.5-2
libqb0: 1.0-1
pve-cluster: 4.0-36
qemu-server: 4.0-64
pve-firmware: 1.1-7
libpve-common-perl: 4.0-54
libpve-access-control: 4.0-13
libpve-storage-perl: 4.0-45
pve-libspice-server1: 0.12.5-2
vncterm: 1.2-1
pve-qemu-kvm: 2.5-9
pve-container: 1.0-52
pve-firewall: 2.0-22
pve-ha-manager: 1.0-25
ksm-control-daemon: 1.2-1
glusterfs-client: 3.5.2-2+deb8u1
lxc-pve: 1.1.5-7
lxcfs: 2.0.0-pve2
cgmanager: 0.39-pve1
criu: 1.6.0-1
zfsutils: 0.6.5-pve7~jessie
Below are the packages after the update
root@ccscloud2:~# pveversion -v
proxmox-ve: 4.2-58 (running kernel: 4.4.13-2-pve)
pve-manager: 4.2-17 (running version: 4.2-17/e1400248)
pve-kernel-4.2.6-1-pve: 4.2.6-36
pve-kernel-4.4.13-2-pve: 4.4.13-58
pve-kernel-4.2.8-1-pve: 4.2.8-41
pve-kernel-4.2.2-1-pve: 4.2.2-16
lvm2: 2.02.116-pve2
corosync-pve: 2.3.5-2
libqb0: 1.0-1
pve-cluster: 4.0-43
qemu-server: 4.0-85
pve-firmware: 1.1-8
libpve-common-perl: 4.0-72
libpve-access-control: 4.0-18
libpve-storage-perl: 4.0-56
pve-libspice-server1: 0.12.8-1
vncterm: 1.2-1
pve-qemu-kvm: 2.6-1
pve-container: 1.0-71
pve-firewall: 2.0-29
pve-ha-manager: 1.0-32
ksm-control-daemon: 1.2-1
glusterfs-client: 3.5.2-2+deb8u2
lxc-pve: 1.1.5-7
lxcfs: 2.0.0-pve2
cgmanager: 0.39-pve1
criu: 1.6.0-1
zfsutils: 0.6.5.7-pve10~bpo80
Does anyone know what sets this parameter?