Interface 10Gb ixgbe - Proxmox

[dclick.user]

Hello,

I cannot get a 10 Gb FSP + interface (Supermicro) on my proxmox system (version 5.2-1) !!!
The system installed on supermicro blade with MBM-GEM-004 card (https://www.supermicro.com/en/products/microblade/networking)

root @ hyp04: ~ # dmesg | grep ixgbe
[35281.421655] ixgbe: Intel (R) 10 Gigabit PCI Express Network Driver - version 5.1.0-k
[35281.421656] ixgbe: Copyright (c) 1999-2016 Intel Corporation.

and by typing the command "lshw -class network" I see 10 Gb interfaces!

* -network: 5
description: Ethernet interface
physical id: 8
logical name: fwln4003i0
serial: ba: 45: e4: 0a: 29: b4
size: 10Gbit / s
capabilities: ethernet physical
configuration: autonegotiation = off broadcast = yes driver = veth driverversion = 1.0 duplex = full link = yes multicast = yes port = twisted pair speed = 10Gbit / s

But I don't see them on the proxmox interface.

Do you have any idea about this problem?

Thank you in advance.

 

[mira]

PVE 5.2 is rather old and EOL. Please try it with the latest PVE 6.3 version and see if it works there.

Where do you expect to see them in the PVE GUI? Under Node -> Network only the ones configured in /etc/network/interfaces are shown.