Install Proxmox Dell PowerEdge T610 and H200 Raid Controleur

[babou29]

Hello,

I come to you because I have been trying to install Proxmox on a Dell PowerEdge T610 with a H200 RAID controller card for a while now.

The T610 and the Raid card are updated to the latest version. The Raid card is not in IT mode.

I tried to install in ZFS (RAID0 and RAID1) in ZFS (RAIDZ-1) then in B... .

Nothing works, I have an error message (See screenshot).

I saw that proxmox was not compatible with Hardware RAID controllers but would you have a solution please?

Thank you.
Cordially,
Nicolas

 

[mvs]

It seems that you have some leftover data on your array (perhaps chunks of old partition table, etc).
Boot proxmox iso, switch to console (CTRL+ALT+F3), run sgdisk --zap-all /dev/sda to zap your array, reboot.

 

[babou29]

Good evening.

Thanks for your reply.

Yes, I had an old Proxmox install from my old server on those drives.
I seemed to have erased them though.

Okay, I'll check that but that will be more next week.

Thanks again.
Sincerely,
Nicolas

 

[Forssux]

Hello,

I come to you because I have been trying to install Proxmox on a Dell PowerEdge T610 with a H200 RAID controller card for a while now.

The T610 and the Raid card are updated to the latest version. The Raid card is not in IT mode.

I tried to install in ZFS (RAID0 and RAID1) in ZFS (RAIDZ-1) then in B... .

Nothing works, I have an error message (See screenshot).

I saw that proxmox was not compatible with Hardware RAID controllers but would you have a solution please?

Thank you.
Cordially,
Nicolas

Running zfs on a normal raid card is not recommended, best is to flash it to IT mode...
Google will help you link