Install proxmox 3.3 IBM BLADE problem

[Krzy]

I installed proxmox on IBM Bladecenter H . Installation work good, sucessfylly installed . After reset serwer proxmox not start
and serwer reseting.
Its possible install proxmox on this hardware with uefi ?
Kris

 

[danielmash]

I installed proxmox on IBM Bladecenter H . Installation work good, sucessfylly installed . After reset serwer proxmox not startand serwer reseting.Its possible install proxmox on this hardware with uefi ?Kris

You can workaround it by installing Debian first and then Proxmox packages following this guide https://pve.proxmox.com/wiki/Install_Proxmox_VE_on_Debian_WheezyPlease note Debian is still unable to boot UEFI with enabled "secure boot". You must switch off "secure boot" in BIOS.

 

[danielmash]

Also check very handy wiki page regarding Debian boor on UEFI hardware:https://wiki.debian.org/GrubEFIReinstallDownload and burn CD or USB stick if have trouble to boot from UEFI. Must have!http://www.rodsbooks.com/refind/getting.html