Hi guys, I'm having trouble starting my promox server, it remains on boot, indicates the initramfs. I don't know what to do, I'm new to proxmox. Help!!!
INITRAMFS ON PROXOMX 7.1.2
- Thread starter Polet Aguilar
- Start date
First of all - these warnings might indicate that some dataloss occured - make sure to create backups of the remaining data (e.g. diskdumps) if you have not done so until now!!
* The warnings printed indicate that a disk (/dev/sda) in your system was resized (less than half of its size)
* How did that happen?
* it seems that there are some multipath devices present on this machine - but no multipath config is present in the initramfs
* what kind of disks are in the machine - is it connected to any kind of SAN? (iSCSI/FC/SAS)?
else - if half of the root disk is gone - I'd suggest to install freshly and restore from backup - but in that case it could also be just a misconfiguration on side of your SAN?!
* The warnings printed indicate that a disk (/dev/sda) in your system was resized (less than half of its size)
* How did that happen?
* it seems that there are some multipath devices present on this machine - but no multipath config is present in the initramfs
* what kind of disks are in the machine - is it connected to any kind of SAN? (iSCSI/FC/SAS)?
else - if half of the root disk is gone - I'd suggest to install freshly and restore from backup - but in that case it could also be just a misconfiguration on side of your SAN?!
Hi
* I Create a partition of the disk where the system is installed, on the sda. I wanted to migrate a vmware machine to proxmox.
* how do i create the multipath configuration in initramfs ?
* The server has SAS disks.
I don't have san or isci configuration. I haven't gotten to that point. I'm getting to know proxmox and I've run into many problems.
I would appreciate your help.