I can't acess Web Page

[DonSotocorno]

Hi, i new on proxmox and linux in general. I followed the installation process, then when i try openning the web gui i just get a time out.

 

[Moayad]

Can you ping the IP of your Proxmox host?

 

[DonSotocorno]

I can't! I suppose they isn't in the same network, but idk why

 

[Moayad]

please post the PVE network configuration cat /etc/network/interfaces

EDIT:

and the output of ip a as well

 

[DonSotocorno]

I think must be something with the firewall

cat /etc/network/interfaces

auto lo
iface lo inet loopback

iface enp2so inet manual

auto vmbr0
iface vmbr0 inet static
        adress 192.168.100.2/24
        gateway 192.168.100.1
        bridge-ports enp2so
        bridge-stp off
        bridge-fd 0

ip a

1: lo: <LOOPBACK, UP, LOWER_UP> mtu 65535 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
        valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
        valid_lft forever preferred_lft forever
2: enp2s0: <BRODCAST, MULTICAST, UP, LOWER_UP> mtu 1500 qdisc pfifo_fast master vmbr0 state UP group default qlen 1000
    link/ether 70:71:bc:06:50:17 brd ff:ff:ff:ff:ff:ff
3: vmbr0: <BROADCAST, MULTICAST, UP, LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlent 1000
    link/ether 8a:87:01:2b:f4:33 brd ff:ff:ff:ff:ff:ff
    inet 192.168.100.2/24 scope global vmbr0
        valid_lft forever preferred_lft forever
    inet6 fe80::8887:1ff:fe2b:f433/64 scope link
        valid_lft forever preferred_lft forever

 

[Moayad]

The interface name [enp2s0] in the output of ip a is not the same in your network configuration

you should edit your network configuration to be like:
iface enp2so inet manual
iface enp2s0 inet manual

bridge-ports enp2so
bridge-ports enp2s0

 

[DonSotocorno]

Sorry, this is just a typo