Umm, lets say it was .. creative 
What a great question!
To build an LXC (Linux Containers) container in Proxmox VE (a popular open-source virtualization platform) and use it as a rendering server for DaVinci Resolve, follow these steps:
**Prerequisites:**
1. Proxmox VE 7.x or later installed on your machine.
2. LXC (Linux Containers) installed and configured on your system.
3. A compatible Linux distribution (e.g., Ubuntu 20.04 LTS) installed inside the container.
**Step 1: Create a new LXC container in Proxmox VE**
1. Log in to your Proxmox VE web interface.
2. Go to **Nodes** > **Containers** and click on **Create Container**.
3. Choose **LXC** as the container type.
4. Enter a name for your container (e.g., "DaVinci_Rendering").
**Step 2: Configure the LXC container**
1. Set the **Template** to an Ubuntu-based distribution (e.g., Ubuntu 20.04 LTS).
2. Choose a suitable **Root filesystem** size based on your needs.
3. Enable **Auto-start** if you want the container to start automatically when Proxmox VE boots.
**Step 3: Install DaVinci Resolve inside the LXC container**
1. Log in to the container using SSH (e.g., `ssh root@localhost -p <port>`, where `<port>` is the port number specified during container creation).
2. Update the package list and install DaVinci Resolve: `sudo apt update && sudo apt install davinciresolve`
**Step 4: Configure DaVinci Resolve for rendering**
1. Start DaVinci Resolve inside the container: `davinciresolve`
2. Create a new project or load an existing one.
3. Go to **File** > **Project Settings** and set the render settings as desired (e.g., output format, resolution, frame rate).
4. Save your changes.
**Step 5: Configure Proxmox VE to expose the container's rendering capabilities**
1. In the Proxmox VE web interface, go to **Nodes** > **Containers** and select your DaVinci_Rendering container.
2. Click on **Edit** and scroll down to the **Networking** section.
3. Enable **Host-only networking** and specify a suitable IP address range (e.g., `192.168.1.100-200`).
4. Save your changes.
**Step 6: Test rendering from outside the container**
1. From another machine on the same network, use DaVinci Resolve to render a project or load an existing one.
2. In DaVinci Resolve, go to **File** > **Project Settings** and select the container's IP address (e.g., `192.168.1.101`) as the render server.
That's it! You now have an LXC container running Ubuntu 20.04 LTS with DaVinci Resolve installed and configured as a rendering server, accessible from outside the container via Proxmox VE's host-only networking feature.
What a great question!
To build an LXC (Linux Containers) container in Proxmox VE (a popular open-source virtualization platform) and use it as a rendering server for DaVinci Resolve, follow these steps:
**Prerequisites:**
1. Proxmox VE 7.x or later installed on your machine.
2. LXC (Linux Containers) installed and configured on your system.
3. A compatible Linux distribution (e.g., Ubuntu 20.04 LTS) installed inside the container.
**Step 1: Create a new LXC container in Proxmox VE**
1. Log in to your Proxmox VE web interface.
2. Go to **Nodes** > **Containers** and click on **Create Container**.
3. Choose **LXC** as the container type.
4. Enter a name for your container (e.g., "DaVinci_Rendering").
**Step 2: Configure the LXC container**
1. Set the **Template** to an Ubuntu-based distribution (e.g., Ubuntu 20.04 LTS).
2. Choose a suitable **Root filesystem** size based on your needs.
3. Enable **Auto-start** if you want the container to start automatically when Proxmox VE boots.
**Step 3: Install DaVinci Resolve inside the LXC container**
1. Log in to the container using SSH (e.g., `ssh root@localhost -p <port>`, where `<port>` is the port number specified during container creation).
2. Update the package list and install DaVinci Resolve: `sudo apt update && sudo apt install davinciresolve`
**Step 4: Configure DaVinci Resolve for rendering**
1. Start DaVinci Resolve inside the container: `davinciresolve`
2. Create a new project or load an existing one.
3. Go to **File** > **Project Settings** and set the render settings as desired (e.g., output format, resolution, frame rate).
4. Save your changes.
**Step 5: Configure Proxmox VE to expose the container's rendering capabilities**
1. In the Proxmox VE web interface, go to **Nodes** > **Containers** and select your DaVinci_Rendering container.
2. Click on **Edit** and scroll down to the **Networking** section.
3. Enable **Host-only networking** and specify a suitable IP address range (e.g., `192.168.1.100-200`).
4. Save your changes.
**Step 6: Test rendering from outside the container**
1. From another machine on the same network, use DaVinci Resolve to render a project or load an existing one.
2. In DaVinci Resolve, go to **File** > **Project Settings** and select the container's IP address (e.g., `192.168.1.101`) as the render server.
That's it! You now have an LXC container running Ubuntu 20.04 LTS with DaVinci Resolve installed and configured as a rendering server, accessible from outside the container via Proxmox VE's host-only networking feature.
Last edited: