http access to container with dhcp

[liebero3]

Hello,

I have my proxmox Host 192.168.178.60 behind a fritzbox (router). The fritzbox leases a ip-address to a ubuntu-container, in my case 192.168.178.63.

I can reach the webserver inside my lan via http://192.168.178.63.
I can forward port 22 to my webserver with the fritzbox and I can ssh into the webserver over dyn-dns(myfritz).
But forwarding port 80 to my webserver does not work.

Is there anything special about port 80 with proxmox, that 22 (and some others) do work, but 80 don't? Does it have anything to do with proxmox at all?

If you need more Informations about the setup just ask.

Cheers,
Till

 

[manu]

no there is nothing special about this port, except if of course the firewall does not block it

verify if from your LAN the port is open with

nmap -p 80 192.168.178.63.

and then test it againg with your myfritz if *from outside your lan*

 

[liebero3]

This is the output after connecting through hotspot of my phone.

Maybe I have to check my apache config again? Inside the lan the website opens, outside chrome says ERR_CONNECTION_TIMED_OUT.

C:\Users\liebe>nmap -p 80 **********.de

Starting Nmap 7.12 ( https://nmap.org ) at 2017-05-04 14:24 Mitteleuropõische Sommerzeit
Nmap scan report for **********.de (87.79.***.***)
Host is up (0.093s latency).
rDNS record for 87.79.***.***: xdsl-87-79-***-***.netcologne.de
PORT STATE SERVICE
80/tcp open http

Nmap done: 1 IP address (1 host up) scanned in 1.77 seconds

 

[manu]

then probably something is wrong with the port forwarding in your fritz box ( wrong target IP ) or you ISP is blocking incoming http connections

 

[liebero3]

That is strange...I configured it the exact same way inside the fritzbox before, when I had the webserver on a raspberry pi (obviously with a different ip to forward).

I'll double-check that. Thanks for your help!

 

[liebero3]

Now that I have some freetime again, I came back to this project.

Is there anyone, who has an idea, what my problem could be?

If I set a portforward of port 22, I can ssh into my webserver over myfritz (dyndns). Everything works fine.

If I set a portforward of port 80 it just times out. The same forward to my raspberry pi works fine. (obviously, I don't have them both simultaniously).

I have no idea, whats going wrong here. Anything I could check?

Cheers,
Till