HPE Synergy 3820C 10/20Gb CNA

[Fabinbasil]

We have HPE Synergy with the 3820 10/20GB CNA card connected to the MSA 2050 Storage via FC. LUN Allocated to the Server's . However when we check from the Proxmox console its not finding any FC adapters . Please provide some suggestion .

 

[bobmc]

what is the output of

lspci | grep -i "Fibre"

 

[Fabinbasil]

No results show

 

[Fabinbasil]

but when tried


root@prod1:/etc/fcoe# dmesg | grep -i fc
[ 0.000000] BIOS-e820: [mem 0x00000000a34fc000-0x00000000afffffff] usable
[ 0.027037] ACPI: SSDT 0x00000000A3450000 0047FC (v02 HPE PCISSDT 00000002 HPE 00020000)
[ 0.027695] node 0: [mem 0x00000000a34fc000-0x00000000afffffff]
[ 1.095987] DMAR: DRHD base: 0x000000ef3fc000 flags: 0x0
[ 1.095993] DMAR: dmar0: reg_base_addr ef3fc000 ver 1:0 cap 8d2078c106f0466 ecap f020df
[ 1.095996] DMAR: DRHD base: 0x000000f37fc000 flags: 0x0
[ 1.095999] DMAR: dmar1: reg_base_addr f37fc000 ver 1:0 cap 8d2078c106f0466 ecap f020df
[ 1.096001] DMAR: DRHD base: 0x000000f7bfc000 flags: 0x0
[ 1.096004] DMAR: dmar2: reg_base_addr f7bfc000 ver 1:0 cap 8d2078c106f0466 ecap f020df
[ 1.096006] DMAR: DRHD base: 0x000000fbffc000 flags: 0x0
[ 1.096009] DMAR: dmar3: reg_base_addr fbffc000 ver 1:0 cap 8d2078c106f0466 ecap f020df
[ 1.096011] DMAR: DRHD base: 0x000000e27fc000 flags: 0x0
[ 1.096014] DMAR: dmar4: reg_base_addr e27fc000 ver 1:0 cap 8d2078c106f0466 ecap f020df
[ 1.096015] DMAR: DRHD base: 0x000000e6bfc000 flags: 0x0
[ 1.096018] DMAR: dmar5: reg_base_addr e6bfc000 ver 1:0 cap 8d2078c106f0466 ecap f020df
[ 1.096019] DMAR: DRHD base: 0x000000eaffc000 flags: 0x0
[ 1.096022] DMAR: dmar6: reg_base_addr eaffc000 ver 1:0 cap 8d2078c106f0466 ecap f020df
[ 1.096023] DMAR: DRHD base: 0x000000de3fc000 flags: 0x1
[ 1.096026] DMAR: dmar7: reg_base_addr de3fc000 ver 1:0 cap 8d2078c106f0466 ecap f020df
[ 1.096035] DMAR-IR: IOAPIC id 12 under DRHD base 0xeaffc000 IOMMU 6
[ 1.096036] DMAR-IR: IOAPIC id 11 under DRHD base 0xe6bfc000 IOMMU 5
[ 1.096037] DMAR-IR: IOAPIC id 10 under DRHD base 0xe27fc000 IOMMU 4
[ 1.096038] DMAR-IR: IOAPIC id 18 under DRHD base 0xfbffc000 IOMMU 3
[ 1.096039] DMAR-IR: IOAPIC id 17 under DRHD base 0xf7bfc000 IOMMU 2
[ 1.096040] DMAR-IR: IOAPIC id 16 under DRHD base 0xf37fc000 IOMMU 1
[ 1.096040] DMAR-IR: IOAPIC id 15 under DRHD base 0xef3fc000 IOMMU 0
[ 1.096041] DMAR-IR: IOAPIC id 8 under DRHD base 0xde3fc000 IOMMU 7
[ 1.096042] DMAR-IR: IOAPIC id 9 under DRHD base 0xde3fc000 IOMMU 7
[ 1.096043] DMAR-IR: HPET id 0 under DRHD base 0xde3fc000
[ 2.685493] Loaded X.509 cert 'Build time autogenerated kernel key: da6277a2f83d64c41e13b2887fc2e2072c1de73b'
[52743.593161] bnx2fc: QLogic FCoE Driver bnx2fc v2.12.13 (October 15, 2015)
[52743.601325] bnx2fc: bnx2fc: FCoE initialized for ens3f3.
[52743.605829] bnx2fc: bnx2fc: FCoE initialized for ens3f2.

 

[bobmc]

So do you not see 'ens3f3' and 'ens3f2' under network adaptors in the Proxmox console?

 

[lcantov]

Hi, I had the same problem

https://balagur.blogspot.com/2021/01/fcoe-ubuntu-2004-hpe-synergy-sy480.html

 

[VirtAngus]

Have you fcoe-utils installed? What will

fipvlan -u -c -s -d ens3f3

or

fipvlan -u -c -s -d ens3f2

say? If that will help connect to fabric then please follow instructions for fcoe-utils package (set up /etc/fcoe/cfg-ens3f2.conf and /etc/fcoe/cfg-ens3f3.conf and call

fcoeadm -c ens3f2
fcoeadm -c ens3f3

in post-up /etc/netfork/interfaces file for these ifaces)