Hello, Is Proxmox compatible with the HPE DL3080 & an HPE MSA 2060 FC? The host will have two drives in a RAID1, and will be connected via 4 Fiber SFP links to the MSA. If so, what settings should I set in Proxmox? I found a similar thread saying to use iSCSI but the MSA is Fiber Channel.
HPE DL380 G11 & HPE MSA 2062 FC
- Thread starter CSAPMX
- Start date
Hi @CSAPMX , welcome to the forum.
PVE is based on Debian userland and an Ubuntu-derived Kernel. You should consult your hardware vendor's compatibility matrix to verify support for these OS/Kernel versions and check for any specific version requirements or recommendations.
I expect this to work, but compatibility is not guaranteed.
Cheers
Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox
PVE is based on Debian userland and an Ubuntu-derived Kernel. You should consult your hardware vendor's compatibility matrix to verify support for these OS/Kernel versions and check for any specific version requirements or recommendations.
I expect this to work, but compatibility is not guaranteed.
Cheers
Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox