Help with zfs raid issue

[nvasquez72]

I am a very new user of proxmox, and recently I have purchased an r730 to play with homelab stuff. I have a previous "test" install of proxmox which I installed on a zfs raid 0 partition of 2 1,8gb drives. I did not really understand what I was doing at that point. After that, I got some new, smaller drives, so I moved the 2x1.8tb drives to slots 5 & 6, and insalled the new ones in 1-4. I did a fresh install of proxmox on one of the new 300 gb drives.

Now the issue is that the 2 previous drives do not appear in proxmox zpool status. They do not even appear in the LifeCycle Controller. How can I get those 2 drives back?

 

[waltar]

Download raid ctrl tool perccli from Dell and install on pve
perccli64 /call show

 

[nvasquez72]

I will try that, however, I should say that the life cycle controller shows that there are no configured disks.

Edit: also you say "install on pve" as if I have any idea how to do that. Sorry, I do not have an instant command of Linux cli coding.

 

[waltar]

apt install <dell-file>