Help creating udev rule

[jorgeg73]

Hello all. I have install NUT (UPS monitor) on a lxc CT on proxmox. I have a usb hub and i am connecting 2 UPS and that hub.
When i reboot my proxmox, the access for those usb ports change. Need to be 666 so NUT can read the information on the UPS and after reboot it goes to 662.
I have read but can not get it work so here is my information.
Thanks for all teh help.
Any more information glad to share

SUBSYSTEMS=="usb", ATTRS{idVendor}=="051d", ATTRS{idProduct}=="0002", GROUP="users", MODE="0666"
SUBSYSTEMS=="usb", ATTRS{idVendor}=="0764", ATTRS{idProduct}=="0501", GROUP="users", MODE="0666"

I name my file 01-ups-nut.rules, Do not know if the file has to have a particular name.

lsusb
Bus 001 Device 004: ID 0764:0501 Cyber Power System, Inc. CP1500 AVR UPS
Bus 001 Device 003: ID 051d:0002 American Power Conversion Uninterruptible Power Supply

usb-devices

T: Bus=01 Lev=02 Prnt=02 Port=02 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=051d ProdID=0002 Rev=00.90
S: Manufacturer=American Power Conversion
S: Product=Back-UPS NS 675M1 FW:930.a8 .D USB FW:a8
S: SerialNumber=XXXXXXXXXXX
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=2mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbfs
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=100ms

T: Bus=01 Lev=02 Prnt=03 Port=03 Cnt=01 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0764 ProdID=0501 Rev=02.00
S: Manufacturer=CPS
S: Product=BRG850AVRLCD
S: SerialNumber=XXXXXXXXXXXXXXXXXXXX
C: #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=2mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbfs
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=10ms

 

[gfngfn256]

What does cat /etc/pve/lxc/{CTID}.conf look like?

 

[jorgeg73]

What does cat /etc/pve/lxc/{CTID}.conf look like?

arch: amd64
cores: 1
features: fuse=1,nesting=1
hostname: NUCups
memory: 512
net0: name=eth0,bridge=vmbr0,firewall=1,gw=10.1.26.1,hwaddr=BC:24:11:8B:EF:9B,ip=10.1.26.2/24,tag=26,type=veth
onboot: 1
ostype: debian
rootfs: local:105/vm-105-disk-0.raw,size=3G
swap: 512
lxc.cgroup2.devices.allow: c 189:* rwm
lxc.mount.entry: /dev/bus/usb/001 dev/bus/usb/001 none bind,optional,create=dir 0,0

 

[gfngfn256]

What does ls -la /dev/bus/usb/001 show on host.

lxc.mount.entry: /dev/bus/usb/001 dev/bus/usb/001 none bind,optional,create=dir 0,0

Don't know what that "0,0" is at the end.

 

[jorgeg73]

What does ls -la /dev/bus/usb/001 show on host.


Don't know what that "0,0" is at the end.

I was following a tutorial. Me either I can erase it no problem. Already erase the 0,0
Host
ls -al /de/bus/usb/001
crw-rw-rw- 1 root users 189, 6 may 8 09:52 007
crw-rw-rw- 1 root users 189, 7 may 8 08:56 008


Lxc
ls -al /de/bus/usb/001
crw-rw-rw- 1 root users 189, 6 may 8 09:52 007
crw-rw-rw- 1 root users 189, 7 may 8 08:56 008