Having an issue with my nic

[rsvg]

I see a lot of these in dmesg

I did disable the pve firewall and then installed UFW. Perhaps I botched it?

I also see a ton of these on boot:

[ 54.788646] i40e 0000:b5:00.2: Error I40E_AQ_RC_ENOSPC, forcing overflow promiscuous on PF
[ 54.788752] i40e 0000:b5:00.2: Error I40E_AQ_RC_ENOSPC, forcing overflow promiscuous on PF
[ 54.788859] i40e 0000:b5:00.2: Error I40E_AQ_RC_ENOSPC, forcing overflow promiscuous on PF
[ 54.788965] i40e 0000:b5:00.2: Error I40E_AQ_RC_ENOSPC, forcing overflow promiscuous on PF
[ 54.789071] i40e 0000:b5:00.2: Error I40E_AQ_RC_ENOSPC, forcing overflow promiscuous on PF
[ 54.789177] i40e 0000:b5:00.2: Error I40E_AQ_RC_ENOSPC, forcing overflow promiscuous on PF
[ 54.789283] i40e 0000:b5:00.2: Error I40E_AQ_RC_ENOSPC, forcing overflow promiscuous on PF
[ 54.789389] i40e 0000:b5:00.2: Error I40E_AQ_RC_ENOSPC, forcing overflow promiscuous on PF

Any help is appreciated.

 

[ph0x]

You're not supposed to uninstall the firewall ...

 

[rsvg]

I didn’t uninstall it, I just disabled it

 

[ph0x]

Please revert these changes and try again. The firewall is a relevant part of the installation and should not be replaced.

 

[rsvg]

I didn't replace it, and I've already disabled and uninstalled UFW. Same issue.

[53629.876044] i40e 0000:b5:00.2 eno7: NIC Link is Down
[53629.889244] vmbr0: port 1(eno7) entered disabled state
[53641.563446] i40e 0000:b5:00.2 eno7: NIC Link is Up, 10 Gbps Full Duplex, Flow Control: None
[53641.576483] vmbr0: port 1(eno7) entered blocking state
[53641.576485] vmbr0: port 1(eno7) entered forwarding state
[53687.648656] i40e 0000:b5:00.2 eno7: NIC Link is Down
[53687.661836] vmbr0: port 1(eno7) entered disabled state
[53698.152528] i40e 0000:b5:00.2 eno7: NIC Link is Up, 10 Gbps Full Duplex, Flow Control: None
[53698.165567] vmbr0: port 1(eno7) entered blocking state
[53698.165569] vmbr0: port 1(eno7) entered forwarding state

 

[ph0x]

Okay, I suggest to go up the OSI layers to find the problem. Did you change the cable? What is the switch saying about the link state?

 

[rsvg]

Ok, thank you for the help. I will begin investigating these things