New to proxmox and would appreciate advise on setting up storage.
System is for homelab, non-production.
Setup initial filesystem as zfs raid1 consisting of 128 GB portions of 2 x SN850X 2TB SSD
This will only be used for Proxmox and other bare metal assets. Goal is to keep it tight to facilitate backup.
Question is next step. I have a total of 3 SN850X in the system:
Assuming that this is all reasonable, I am leaning toward the RAIDZ-1 option for redundancy.
The remainder of the SN850 4TB SSD would be setup as cache, iso repo, etc.
Current Setup:
Note: the WD Red is the first of several that will be added as a NAS.
Ref:
System is for homelab, non-production.
Setup initial filesystem as zfs raid1 consisting of 128 GB portions of 2 x SN850X 2TB SSD
This will only be used for Proxmox and other bare metal assets. Goal is to keep it tight to facilitate backup.
Question is next step. I have a total of 3 SN850X in the system:
- 2 x SN850X 2TB SSD
- 1 x SN850 4TB SSD
- 2 x 1.69 TB partition of SN850X 2TB SSD (the remainder of those drives)
- in RAID-1
- 2 x 1.69 TB partition of SN850X 2TB SSD (the remainder of those drives), plus
- 1 x 1.69 TB partition of SN850 4TB SSD
- in RAIDZ-1
Assuming that this is all reasonable, I am leaning toward the RAIDZ-1 option for redundancy.
The remainder of the SN850 4TB SSD would be setup as cache, iso repo, etc.
Current Setup:
Note: the WD Red is the first of several that will be added as a NAS.
Ref: