Hi
i have a proxmox cluster 3.4 with 3 nodes.
2 of them have glusterfs-server installed and share a 16TB volume.
Each server is connected to a 10Gb switch with a single 10Gb nic
Local writes to the mounted raid 5 partiotion can be done with about 450 MB/sec
I configured glusterfs as storage for all nodes.
When i restore vm's (Backup files are between 30 and 60 GB) i can only restore with about 60-80 MB/sec which seems a bit slow.
Also Backups of running vm's can only be done with about 100 MB/sec.
When i do a "mount" on NODE1, i can only see that NODE1:/gluster is mounted
a "Mount" on NODE2 gives me also only NODE1:/gluster
i have configured the storage to use NODE1 and NODE2
It is a simple replica 2 glustervolume.
Can anyone give suggestions?
proxmox-ve-2.6.32: 3.3-147 (running kernel: 2.6.32-37-pve)
pve-manager: 3.4-1 (running version: 3.4-1/3f2d890e)
pve-kernel-2.6.32-37-pve: 2.6.32-147
lvm2: 2.02.98-pve4
clvm: 2.02.98-pve4
corosync-pve: 1.4.7-1
openais-pve: 1.1.4-3
libqb0: 0.11.1-2
redhat-cluster-pve: 3.2.0-2
resource-agents-pve: 3.9.2-4
fence-agents-pve: 4.0.10-2
pve-cluster: 3.0-16
qemu-server: 3.3-20
pve-firmware: 1.1-3
libpve-common-perl: 3.0-24
libpve-access-control: 3.0-16
libpve-storage-perl: 3.0-31
pve-libspice-server1: 0.12.4-3
vncterm: 1.1-8
vzctl: 4.0-1pve6
vzprocps: 2.0.11-2
vzquota: 3.1-2
pve-qemu-kvm: 2.1-12
ksm-control-daemon: 1.1-1
glusterfs-client: 3.6.2-2
Glusterfs-server is 3.6.2-2 from gluster.org
i have a proxmox cluster 3.4 with 3 nodes.
2 of them have glusterfs-server installed and share a 16TB volume.
Each server is connected to a 10Gb switch with a single 10Gb nic
Local writes to the mounted raid 5 partiotion can be done with about 450 MB/sec
I configured glusterfs as storage for all nodes.
When i restore vm's (Backup files are between 30 and 60 GB) i can only restore with about 60-80 MB/sec which seems a bit slow.
Also Backups of running vm's can only be done with about 100 MB/sec.
When i do a "mount" on NODE1, i can only see that NODE1:/gluster is mounted
a "Mount" on NODE2 gives me also only NODE1:/gluster
i have configured the storage to use NODE1 and NODE2
It is a simple replica 2 glustervolume.
Can anyone give suggestions?
proxmox-ve-2.6.32: 3.3-147 (running kernel: 2.6.32-37-pve)
pve-manager: 3.4-1 (running version: 3.4-1/3f2d890e)
pve-kernel-2.6.32-37-pve: 2.6.32-147
lvm2: 2.02.98-pve4
clvm: 2.02.98-pve4
corosync-pve: 1.4.7-1
openais-pve: 1.1.4-3
libqb0: 0.11.1-2
redhat-cluster-pve: 3.2.0-2
resource-agents-pve: 3.9.2-4
fence-agents-pve: 4.0.10-2
pve-cluster: 3.0-16
qemu-server: 3.3-20
pve-firmware: 1.1-3
libpve-common-perl: 3.0-24
libpve-access-control: 3.0-16
libpve-storage-perl: 3.0-31
pve-libspice-server1: 0.12.4-3
vncterm: 1.1-8
vzctl: 4.0-1pve6
vzprocps: 2.0.11-2
vzquota: 3.1-2
pve-qemu-kvm: 2.1-12
ksm-control-daemon: 1.1-1
glusterfs-client: 3.6.2-2
Glusterfs-server is 3.6.2-2 from gluster.org